Forum GLPI-Project

m123

Member

Registered: 2020-08-19

Posts: 4

GLPI Network Port Speed Not Added

Hello,

I am using GLPI with FusionInventory and noticing that none of the network equipment is getting the network port speed field populated

This is the FusionInventory XML from a Cisco Catalyst 3750 switch. Everything from VLAN to IFNumber gets imported, but for some reason IFSpeed is not imported.

I reset all import and link rules.

Any ideas on how to get this to auto-populate?

<PORT>
          <IFDESCR>GigabitEthernet1/0/5</IFDESCR>
          <IFINERRORS>0</IFINERRORS>
          <IFINOCTETS>0</IFINOCTETS>
          <IFMTU>9198</IFMTU>
          <IFNAME>Gi1/0/5</IFNAME>
          <IFNUMBER>10105</IFNUMBER>
          <IFOUTOCTETS>0</IFOUTOCTETS>
          <IFPORTDUPLEX>1</IFPORTDUPLEX>
          <IFSPEED>10000000</IFSPEED>
          <IFSTATUS>2</IFSTATUS>
          <IFTYPE>6</IFTYPE>
          <MAC>f8:72:ea:e6:d9:05</MAC>
          <TRUNK>0</TRUNK>
          <VLANS>
                      <VLAN>
                           <NAME>Desktop_Vlan</NAME>
                           <NUMBER>100</NUMBER>
                      </VLAN>
         </VLANS>
</PORT>

GLPI 9.5.0 and FusionInventory Agent 2.5.2

hbesbes

Member

Registered: 2024-09-05

Posts: 4

Re: GLPI Network Port Speed Not Added

Hello,
i want to know if you find a solution for your problem?
thnks

Last edited by hbesbes (2024-09-05 09:49:07)