Forum GLPI-Project

Vtom

Member

Registered: 2019-04-26

Posts: 36

SMNP with fusioninventory, how ?

Hi there

Use glpi with fusioninventory and would like to activate the SNMP service.
Unfortunately I am not so smart from all the instructions, does an extra client have to do this or can the web server do it itself?
What needs to be installed with this client?

Thanks for any tips, also in German.

Tom
------------------------
Hallo

Verwende glpi mit fusioninventory und würde gerne den SNMP Service aktivieren.
Leider werde ich aus den ganzen Anleitungen nicht so schlau, muss da ein extra Client dies ausführen oder kann das der Webserver selber ?
Was muss bei diesem Client alles installiert werden ?

Danke für eventuelle Tipps, gerne auch in Deutsch.

Tom

WebGreg

Member

Registered: 2020-02-27

Posts: 739

Re: SMNP with fusioninventory, how ?

Hello.

What do you really have a problem with and what do you want to get?
Do you mean that you want e.g. to inventory printers after snmp but don't know how?

---

--
GLPI 10.0.7
GLPI-Inventory 1.2.1
Ubuntu Server 20.04 LTS

Vtom

Member

Registered: 2019-04-26

Posts: 36

Re: SMNP with fusioninventory, how ?

Nun ich habe dazu mehrere Fragen:
Was ist bei smnp 1 und 2 einzustellen auf den jeweiligen Geräten.
Braucht es einen EXTRA Client wo diese smnp Dienste ausführt ?

Inzwischen mache ich es per extra Client, ein paar Geräte kommen auch schon rein. Vermute aber das einige in den Netzwerkkomponenten blockiert werden.

Now I have several questions:
What should be set for smnp 1 and 2 on the respective devices.
Do you need an EXTRA client where they run smnp services?

In the meantime I do it with an extra client, a few devices are already coming in. But suspect that some are blocked in the network components.

Und schade das es für diese Grossartige Lösung keinen anständigen deutschen Support bzw. Forum gibt :-(

WebGreg

Member

Registered: 2020-02-27

Posts: 739

Re: SMNP with fusioninventory, how ?

Entschuldigung, ich kann kein Deutsch Aber ich werde es versuchen Aber auf Englisch, was ich auch sehr wenig weiß :-D

On the example of the network printer (192.168.100.12).

1. Logging in to the printer > looking for SNMP settings > I set a community name for SNMPv1 e.g: myCommunityName1
2. Administration > FusionInventory > Networking > SNMP credentials > Add (plus) > set name, version as 1 and community name myCommunityName1 (without user nad passwords - this is for SNMPv3).
3. Administration > FusionInventory > Networking > IP Ranges > Add > ... I think you know what you should set here
4. When you add the IP range, enter this range and at the "Associated SNMP credentials" tab associate what you set at the point 2.
5. Administration > FusionInventory > Tasks > discovery task for this IP range.
6. Administration > FusionInventory > Tasks > inventory task for this IP range.

First you need to discover the device. Once you have them detected and added fo GLPI, the inventory task starts running (according to the schedule, or after force activation).

Any question?

---

--
GLPI 10.0.7
GLPI-Inventory 1.2.1
Ubuntu Server 20.04 LTS

oj69

Member

From: Somewhere in the cloud

Registered: 2021-02-01

Posts: 157

Re: SMNP with fusioninventory, how ?

Und schade das es für diese Grossartige Lösung keinen anständigen deutschen Support bzw. Forum gibt :-(

Hallo Vtom,

es ist eben eine französische Entwicklung und vollkommen Open Source. Wenn Du mehr bzw. persönlichen Support benötigst kannst Du über GLPI-Network professionellen Support einkaufen.

Grüße

Oliver

machobymb

Member

Registered: 2017-11-14

Posts: 4

Re: SMNP with fusioninventory, how ?

Entschuldigung, ich kann kein Deutsch Aber ich werde es versuchen Aber auf Englisch, was ich auch sehr wenig weiß :-D

On the example of the network printer (192.168.100.12).

1. Logging in to the printer > looking for SNMP settings > I set a community name for SNMPv1 e.g: myCommunityName1
2. Administration > FusionInventory > Networking > SNMP credentials > Add (plus) > set name, version as 1 and community name myCommunityName1 (without user nad passwords - this is for SNMPv3).
3. Administration > FusionInventory > Networking > IP Ranges > Add > ... I think you know what you should set here
4. When you add the IP range, enter this range and at the "Associated SNMP credentials" tab associate what you set at the point 2.
5. Administration > FusionInventory > Tasks > discovery task for this IP range.
6. Administration > FusionInventory > Tasks > inventory task for this IP range.

First you need to discover the device. Once you have them detected and added fo GLPI, the inventory task starts running (according to the schedule, or after force activation).

Any question?

I also have a problem. I can't integrate network printers (GLPI 9.5.4 + FusionInventory 2.6 + latest version plugin). Earlier versions didn't work either, and I don't understand why. If I run FusionInventory on that printer from the command line, I get the XML, but I want to read its data automatically.

My rules:
Peripheralserial-->Yes
Peripheralimport-->Yes
Peripheralignoreimport-->Yes
Monitorserial-->Yes
Deviceupdate(bymac+ifnumberrestrictedport)-->Yes
Monitorimport-->Yes
Deviceupdate(bymac+ifnumbernotrestrictedport)-->Yes
Monitorignoreimport-->Yes
Deviceupdate(byip+ifdescrrestrictedport)-->Yes
Deviceupdate(byip+ifdescrnotrestrictedport)-->Yes
Deviceimport(bymac+ifnumber)-->Yes
Deviceimport(byip+ifdescr)-->Yes
Updateonlymacaddress(maconswitchport)-->Yes
Importonlymacaddress(maconswitchport)-->Yes
Computerconstraint(name)-->Yes
Computerupdate(byserial+uuid)-->Yes
Computerupdate(byserial)-->Yes
Computerupdate(byuuid)-->Yes
Computerupdate(bymac)-->Yes
Computerupdate(byname)-->Yes
Computerimport(byserial+uuid)-->Yes
Computerimport(byserial)-->Yes
Computerimport(byuuid)-->Yes
Computerimport(bymac)-->Yes
Computerimport(byname)-->Yes
Computerimportdenied-->No
Printerconstraint(name)-->Yes
Printerupdate(byserial)-->Yes
Printerupdate(bymac)-->Yes
Printerimport(byserial)-->Yes
Printerimport(bymac)-->Yes
Printerimportdenied-->No
NetworkEquipmentconstraint(name)-->Yes
NetworkEquipmentupdate(byserial)-->Yes
NetworkEquipmentupdate(bymac)-->Yes
NetworkEquipmentimport(byserial)-->Yes
NetworkEquipmentimport(bymac)-->Yes
NetworkEquipmentimportdenied-->No
Peripheralupdate(byserial)-->Yes
Peripheralimport(byserial)-->Yes
Peripheralimportdenied-->No
Monitorupdate(byserial)-->Yes
Monitorimport(byserial)-->Yes
Monitorimportdenied-->No
Phoneconstraint(name)-->Yes
Phoneupdate(bymac)-->Yes
Phoneimport(bymac)-->Yes
Phoneimportdenied-->No
Globalconstraint(name)-->Yes
Globalupdate(byserial)-->Yes
Globalupdate(bymac)-->Yes
Globalimport(byserial)-->Yes
Globalimport(bymac)-->Yes
Globalimportdenied-->Yes