Forum GLPI-Project

olipi2017

Member

Registered: 2017-11-03

Posts: 20

Problème avec le déploiement de Fusion Inventory avec la GPO

Bonjour à tous,
Je rencontre un problème auquel je ne trouve aucune solution actuellement. Je souhaite déployer Fusion Inventory GLPI sur les ordinateurs de mon entreprise afin de pouvoir avoir l'inventaire des machines.
Malheureusement, j'ai trouvé un script de démarrage qui s'exécute sur toutes les machines mais ne parvient pas à installer les agents sur toutes les machines du réseau.
J'ai utilisé le script fusioninventory.vbs suivant :

'  ------------------------------------------------------------------------
'  fusioninventory-agent-deployment.vbs
'  Copyright (C) 2010-2013 by the FusionInventory Development Team.
'
'  http://www.fusioninventory.org/ http://forge.fusioninventory.org/
'  ------------------------------------------------------------------------
'
'  LICENSE
'
'  This file is part of FusionInventory project.
'
'  This file is free software; you can redistribute it and/or modify it
'  under the terms of the GNU General Public License as published by the
'  Free Software Foundation; either version 2 of the License, or (at your
'  option) any later version.
'
'
'  This file is distributed in the hope that it will be useful, but WITHOUT
'  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
'  FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
'  more details.
'
'  You should have received a copy of the GNU General Public License
'  along with this program; if not, write to the Free Software Foundation,
'  Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA,
'  or see <http://www.gnu.org/licenses/>.
'
'  ------------------------------------------------------------------------
'
'  @package   FusionInventory Agent
'  @file      .\contrib\windows\fusioninventory-agent-deployment.vbs
'  @author(s) Benjamin Accary <meldrone@orange.fr>
'             Christophe Pujol <chpujol@gmail.com>
'             Marc Caissial <marc.caissial@zenitique.fr>
'             Tomas Abad <tabadgp@gmail.com>
'  @copyright Copyright (c) 2010-2013 FusionInventory Team
'  @license   GNU GPL version 2 or (at your option) any later version
'             http://www.gnu.org/licenses/old-license … alone.html
'  @link      http://www.fusioninventory.org/
'  @link      http://forge.fusioninventory.org/projec … tory-agent
'  @since     2012
'
'  ------------------------------------------------------------------------
'

'
'
' Purpose:
'     FusionInventory Agent Unatended Deployment.
'
'

Option Explicit
Dim Force, Verbose
Dim Setup, SetupArchitecture, SetupLocation, SetupOptions, SetupVersion

'
'
' USER SETTINGS
'
'

' SetupVersion
'    Setup version with the pattern <major>.<minor>.<release>[-<package>]
'
SetupVersion = "2.4.2"

' SetupLocation
'    Depending on your needs or your environment, you can use either a HTTP or
'    CIFS/SMB.
'
'    If you use HTTP, please, set to SetupLocation a URL:
'
'       SetupLocation = "http://host[:port]/[absolut_path]" or
'       SetupLocation = "https://host[:port]/[absolut_path]"
'
'    If you use CIFS, please, set to SetupLocation a UNC path name:
'
       SetupLocation = "\\serveur-glpi\Partage\"
'
'       You also must be sure that you have removed the "Open File Security Warning"
'       from programs accessed from that UNC.
'
'  Location for Release Candidates
'  SetupLocation = "https://github.com/TECLIB/fusioninvento … /download/" &' SetupVersion
'  SetupLocation = "https://github.com/fusioninventory/fusi … /download/" &' SetupVersion

' SetupArchitecture
'    The setup architecture can be 'x86', 'x64' or 'Auto'
'
'    If you set SetupArchitecture = "Auto" be sure that both installers are in
'    the same SetupLocation.
'
SetupArchitecture = "x64"

' SetupOptions
'    Consult the installer documentation to know its list of options.
'
'    You should use simple quotes (') to set between quotation marks those values
'    that require it; double quotes (") doesn't work with UNCs.
'
SetupOptions = "/acceptlicense /runnow /server='http://172.16.34.13/glpi/plugins/fusioninventory/' /S"

' Setup
'    The installer file name. You should not have to modify this variable ever.
'
Setup = "fusioninventory-agent_windows-" & SetupArchitecture & "_" & SetupVersion & ".exe"

' Force
'    Force the installation even whether Setup is previously installed.
'
Force = "No"

' Verbose
'    Enable or disable the information messages.
'
'    It's advisable to use Verbose = "Yes" with 'cscript //nologo ...'.
'
Verbose = "No"

'
'
' DO NOT EDIT BELOW
'
'

Function AdvanceTime(nMinutes)
   Dim nMinimalMinutes, dtmTimeFuture
   ' As protection
   nMinimalMinutes = 5
   If nMinutes < nMinimalMinutes Then
      nMinutes = nMinimalMinutes
   End If
   ' Add nMinutes to the current time
   dtmTimeFuture = DateAdd ("n", nMinutes, Time)
   ' Format the result value
   '    The command AT accepts 'HH:MM' values only
   AdvanceTime = Hour(dtmTimeFuture) & ":" & Minute(dtmTimeFuture)
End Function

Function baseName (strng)
   Dim regEx, ret
   Set regEx = New RegExp
   regEx.Global = true
   regEx.IgnoreCase = True
   regEx.Pattern = ".*[/\\]([^/\\]+)$"
   baseName = regEx.Replace(strng,"$1")
End Function

Function GetSystemArchitecture()
   Dim strSystemArchitecture
   Err.Clear
   ' Get operative system architecture
   On Error Resume Next
   strSystemArchitecture = CreateObject("WScript.Shell").ExpandEnvironmentStrings("%PROCESSOR_ARCHITECTURE%")
   If Err.Number = 0 Then
      ' Check the operative system architecture
      Select Case strSystemArchitecture
         Case "x86"
            ' The system architecture is 32-bit
            GetSystemArchitecture = "x86"
         Case "AMD64"
            ' The system architecture is 64-bit
            GetSystemArchitecture = "x64"
         Case Else
            ' The system architecture is not supported
            GetSystemArchitecture = "NotSupported"
      End Select
   Else
      ' It has been not possible to get the system architecture
      GetSystemArchitecture = "Unknown"
   End If
End Function

Function isHttp(strng)
   Dim regEx, matches
   Set regEx = New RegExp
   regEx.Global = true
   regEx.IgnoreCase = True
   regEx.Pattern = "^(http(s?)).*"
   If regEx.Execute(strng).count > 0 Then
      isHttp = True
   Else
      isHttp = False
   End If
   Exit Function
End Function

Function IsInstallationNeeded(strSetupVersion, strSetupArchitecture, strSystemArchitecture)
   Dim strCurrentSetupVersion
   ' Compare the current version, whether it exists, with strSetupVersion
   If strSystemArchitecture = "x86" Then
      ' The system architecture is 32-bit
      ' Check if the subkey 'SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\FusionInventory Agent' exists
      '    This subkey is now deprecated
      On error resume next
      strCurrentSetupVersion = WshShell.RegRead("HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\FusionInventory Agent\DisplayVersion")
      If Err.Number = 0 Then
      ' The subkey 'SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\FusionInventory Agent' exists
         If strCurrentSetupVersion <> strSetupVersion Then
            ShowMessage("Installation needed: " & strCurrentSetupVersion & " -> " & strSetupVersion)
            IsInstallationNeeded = True
         End If
         Exit Function
      Else
         ' The subkey 'SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\FusionInventory Agent' doesn't exist
         Err.Clear
         ' Check if the subkey 'SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\FusionInventory-Agent' exists
         On error resume next
         strCurrentSetupVersion = WshShell.RegRead("HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\FusionInventory-Agent\DisplayVersion")
         If Err.Number = 0 Then
         ' The subkey 'SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\FusionInventory-Agent' exists
            If strCurrentSetupVersion <> strSetupVersion Then
               ShowMessage("Installation needed: " & strCurrentSetupVersion & " -> " & strSetupVersion)
               IsInstallationNeeded = True
            End If
            Exit Function
         Else
            ' The subkey 'SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\FusionInventory-Agent' doesn't exist
            Err.Clear
            ShowMessage("Installation needed: " & strSetupVersion)
            IsInstallationNeeded = True
         End If
      End If
   Else
      ' The system architecture is 64-bit
      ' Check if the subkey 'SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\FusionInventory Agent' exists
      '    This subkey is now deprecated
      On error resume next
      strCurrentSetupVersion = WshShell.RegRead("HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\Uninstall\FusionInventory Agent\DisplayVersion")
      If Err.Number = 0 Then
      ' The subkey 'SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\Uninstall\FusionInventory Agent' exists
         If strCurrentSetupVersion <> strSetupVersion Then
            ShowMessage("Installation needed: " & strCurrentSetupVersion & " -> " & strSetupVersion)
            IsInstallationNeeded = True
         End If
         Exit Function
      Else
         ' The subkey 'SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\Uninstall\FusionInventory Agent' doesn't exist
         Err.Clear
         ' Check if the subkey 'SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\Uninstall\FusionInventory-Agent' exists
         On error resume next
         strCurrentSetupVersion = WshShell.RegRead("HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\Uninstall\FusionInventory-Agent\DisplayVersion")
         If Err.Number = 0 Then
         ' The subkey 'SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\Uninstall\FusionInventory-Agent' exists
            If strCurrentSetupVersion <> strSetupVersion Then
               ShowMessage("Installation needed: " & strCurrentSetupVersion & " -> " & strSetupVersion)
               IsInstallationNeeded = True
            End If
            Exit Function
         Else
            ' The subkey 'SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\Uninstall\FusionInventory-Agent' doesn't exist
            Err.Clear
            ' Check if the subkey 'SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\FusionInventory-Agent' exists
            On error resume next
            strCurrentSetupVersion = WshShell.RegRead("HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\FusionInventory-Agent\DisplayVersion")
            If Err.Number = 0 Then
            ' The subkey 'SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\FusionInventory-Agent' exists
               If strCurrentSetupVersion <> strSetupVersion Then
                  ShowMessage("Installation needed: " & strCurrentSetupVersion & " -> " & strSetupVersion)
                  IsInstallationNeeded = True
               End If
               Exit Function
            Else
               ' The subkey 'SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\FusionInventory-Agent' doesn't exist
               Err.Clear
               ShowMessage("Installation needed: " & strSetupVersion)
               IsInstallationNeeded = True
            End If
         End If
      End If
   End If
End Function

Function IsSelectedForce()
   If LCase(Force) <> "no" Then
      ShowMessage("Installation forced: " & SetupVersion)
      IsSelectedForce = True
   Else
      IsSelectedForce = False
   End If
End Function

' http://www.ericphelps.com/scripting/sam … index.html
Function SaveWebBinary(strSetupLocation, strSetup)
   Const adTypeBinary = 1
   Const adSaveCreateOverWrite = 2
   Const ForWriting = 2
   Dim web, varByteArray, strData, strBuffer, lngCounter, ado, strUrl
   strUrl = strSetupLocation & "/" & strSetup
   'On Error Resume Next
   'Download the file with any available object
   Err.Clear
   Set web = Nothing
   Set web = CreateObject("WinHttp.WinHttpRequest.5.1")
   If web Is Nothing Then Set web = CreateObject("WinHttp.WinHttpRequest")
   If web Is Nothing Then Set web = CreateObject("MSXML2.ServerXMLHTTP")
   If web Is Nothing Then Set web = CreateObject("Microsoft.XMLHTTP")
   web.Open "GET", strURL, False
   web.Send
   If Err.Number <> 0 Then
      SaveWebBinary = False
      Set web = Nothing
      Exit Function
   End If
   If web.Status <> "200" Then
      SaveWebBinary = False
      Set web = Nothing
      Exit Function
   End If
   varByteArray = web.ResponseBody
   Set web = Nothing
   'Now save the file with any available method
   On Error Resume Next
   Set ado = Nothing
   Set ado = CreateObject("ADODB.Stream")
   If ado Is Nothing Then
      Set fs = CreateObject("Scripting.FileSystemObject")
      Set ts = fs.OpenTextFile(baseName(strUrl), ForWriting, True)
      strData = ""
      strBuffer = ""
      For lngCounter = 0 to UBound(varByteArray)
         ts.Write Chr(255 And Ascb(Midb(varByteArray,lngCounter + 1, 1)))
      Next
      ts.Close
   Else
      ado.Type = adTypeBinary
      ado.Open
      ado.Write varByteArray
      ado.SaveToFile CreateObject("WScript.Shell").ExpandEnvironmentStrings("%TEMP%") & "\" & strSetup, adSaveCreateOverWrite
      ado.Close
   End If
   SaveWebBinary = True
End Function

Function ShowMessage(strMessage)
   If LCase(Verbose) <> "no" Then
      WScript.Echo strMessage
   End If
End Function

'
'
' MAIN
'
'

Dim nMinutesToAdvance, strCmd, strSystemArchitecture, strTempDir, WshShell
Set WshShell = WScript.CreateObject("WScript.shell")

nMinutesToAdvance = 5

' Get system architecture
strSystemArchitecture = GetSystemArchitecture()
If (strSystemArchitecture <> "x86") And (strSystemArchitecture <> "x64") Then
   ShowMessage("The system architecture is unknown or not supported.")
   ShowMessage("Deployment aborted!")
   WScript.Quit 1
Else
   ShowMessage("System architecture detected: " & strSystemArchitecture)
End If

' Check and auto detect SetupArchitecture
Select Case LCase(SetupArchitecture)
   Case "x86"
      ' The setup architecture is 32-bit
      SetupArchitecture = "x86"
      Setup = Replace(Setup, "x86", SetupArchitecture, 1, 1, vbTextCompare)
      ShowMessage("Setup architecture: " & SetupArchitecture)
   Case "x64"
      ' The setup architecture is 64-bit
      SetupArchitecture = "x64"
      Setup = Replace(Setup, "x64", SetupArchitecture, 1, 1, vbTextCompare)
      ShowMessage("Setup architecture: " & SetupArchitecture)
   Case "auto"
      ' Auto detection of SetupArchitecture
      SetupArchitecture = strSystemArchitecture
      Setup = Replace(Setup, "Auto", SetupArchitecture, 1, 1, vbTextCompare)
      ShowMessage("Setup architecture detected: " & SetupArchitecture)
   Case Else
      ' The setup architecture is not supported
      ShowMessage("The setup architecture '" & SetupArchitecture & "' is not supported.")
      WScript.Quit 2
End Select

' Check the relation between strSystemArchitecture and SetupArchitecture
If (strSystemArchitecture = "x86") And (SetupArchitecture = "x64") Then
   ' It isn't possible to execute a 64-bit setup on a 32-bit operative system
   ShowMessage("It isn't possible to execute a 64-bit setup on a 32-bit operative system.")
   ShowMessage("Deployment aborted!")
   WScript.Quit 3
End If

If IsSelectedForce() Or IsInstallationNeeded(SetupVersion, SetupArchitecture, strSystemArchitecture) Then
   If isHttp(SetupLocation) Then
      ShowMessage("Downloading: " & SetupLocation & "/" & Setup)
      If SaveWebBinary(SetupLocation, Setup) Then
         strCmd = WshShell.ExpandEnvironmentStrings("%ComSpec%")
         strTempDir = WshShell.ExpandEnvironmentStrings("%TEMP%")
         ShowMessage("Running: """ & strTempDir & "\" & Setup & """ " & SetupOptions)
         WshShell.Run """" & strTempDir & "\" & Setup & """ " & SetupOptions, 0, True
         ShowMessage("Scheduling: DEL /Q /F """ & strTempDir & "\" & Setup & """")
         WshShell.Run "AT.EXE " & AdvanceTime(nMinutesToAdvance) & " " & strCmd & " /C ""DEL /Q /F """"" & strTempDir & "\" & Setup & """""", 0, True
         ShowMessage("Deployment done!")
      Else
         ShowMessage("Error downloading '" & SetupLocation & "\" & Setup & "'!")
      End If
   Else
      ShowMessage("Running: """ & SetupLocation & "\" & Setup & """ " & SetupOptions)
      WshShell.Run "CMD.EXE /C """ & SetupLocation & "\" & Setup & """ " & SetupOptions, 0, True
      ShowMessage("Deployment done!")
   End If
Else
   ShowMessage("It isn't needed the installation of '" & Setup & "'.")
End If
CreateObject("Wscript.Shell").Run "runfusioninventory.bat",0,true

mon fichier runfusionnventory.bat est suivant :

cd "c:\Program files\FusionInventory-Agent\perl\bin"
perl fusioninventory-agent

Pouvez-vous m'indiquer ce qui pourrait éventuellement bloquer ?

Merci d'avance pour votre aide et bonne soirée