Forum GLPI-Project

cazarawill

Member

Registered: 2017-10-11

Posts: 5

when glpi/ocs sync it modify the status of monitors connected

Hi,
not sure if its a bug or not but before it does not happen (glpi version 9.2.1)
I am facing this problem,
when my computer send the inventory to OCS and GLPI synchronize with OCS(,
it will automatically disconnect my monitor from my computer and connect again even if no changes have been made to the monitor/computer

so it will change the status of all monitors when GLPI and OCS sync... on my general setup I have the rule under
"Automatically update of the elements related to the computers" seated to copy computer status that most of the time will be "IN USE"
but after link the monitor and computer together it will again change to OCS imported
example

3450051    2018-03-14 13:44    William (3458)    Status    Change IN USE (1) to OSC IMPORTED (7)
3450050    2018-03-14 13:44    William (3458)    Computer    Add a link with an item: XXX459 (3481)
3450048    2018-03-14 13:44    William (3458)    Status    Change PENDING CHECK (6) to IN USE (1)
3450047    2018-03-14 13:44    William (3458)    Alternate username number    Change to 1
3450046    2018-03-14 13:44    William (3458)    Alternate username    Change to williamc
3450045    2018-03-14 13:44    William (3458)    Group    Change   (0) to IT Department (55)
3450044    2018-03-14 13:44    William (3458)    User    Change   (0) to William (3458)
3450043    2018-03-14 13:44    William (3458)    Location    Change   (0) to XXX (Office) (207)
3450042    2018-03-14 13:44    William (3458)    Computer    Delete a link with an item: XXX459 (3481)
3450040    2018-03-14 13:44    William (3458)    Status    Change IN USE (1) to PENDING CHECK (6)
3450039    2018-03-14 13:44    William (3458)    Alternate username number    Change 1 to
3450038    2018-03-14 13:44    William (3458)    Alternate username    Change william to
3450037    2018-03-14 13:44    William (3458)    Group    Change IT Department (55) to   (0)
3450036    2018-03-14 13:44    William (3458)    User    Change William (3458) to   (0)
3450035    2018-03-14 13:44    William (3458)    Location    Change XXX(Office) (207) to   (0) ->>>> GLPI and OCS start to automatically sync
3449953    2018-03-14 13:44    William (3458)    Status    Change OSC IMPORTED (7) to IN USE (1) - >> CHANGE MADE BY HAND(current monitor status IN USE)