Forum GLPI-Project

Udo Rossenfeld

Member

Registered: 2006-09-05

Posts: 3

Problem to connect a Interface to any device

Hi,

I have a problem to connect a network-interface from an networkdevice to any other type of devices (printer, computer ....). The device (a switch) is defined with 16 Ports. I am not able to connect to any other device. In the field "connect to" i select first a computer. In the next field i hit only the return key. In the following Portmanger i fill in the values in the entryfileds. If i press the add-button, i recieve the errormessage "Object not found". The same behavior is on the demo site. I use the glpi version 0.68.1

regards

Udo

MoYo

GLPI - Lead

From: Poitiers

Registered: 2004-09-13

Posts: 14,513

Website

Re: Problem to connect a Interface to any device

I try to connect in the demo site and its works..
Please send us all actions you do.

---

MoYo - Julien Dombre - Association INDEPNET
Contribute to GLPI :    Support     Contribute     References     Freshmeat

Udo Rossenfeld

Member

Registered: 2006-09-05

Posts: 3

Re: Problem to connect a Interface to any device

Hi MoYo,

my goal is to connect a networkdevice with computer and printer. So, I define a networkdevice, and use the computers and printers wich are imported from OCS.
From the Inventory Menu I select the networks item and then the networkdevice I had defined. Now I try to connect a free port to a computer. In the field "connect to" I select the item "Computers". And now I have the problem. How can I select the computer to which the networkdevice should be connected ?
In the next empty field I simply press the return key and then the Port Manager is visible. If I had filled out the fields and press then Add-button the error "Object not found" occurs. Maybe it is a user error, but I don't know how to select the port of computer which I would to connect to the networkdevice.

Thanks for help !

Regrads

Udo

tsmr

GLPI-DEV

From: Rennes

Registered: 2005-08-26

Posts: 11,632

Website

Re: Problem to connect a Interface to any device

Hi MoYo,

my goal is to connect a networkdevice with computer and printer. So, I define a networkdevice, and use the computers and printers wich are imported from OCS.
From the Inventory Menu I select the networks item and then the networkdevice I had defined. Now I try to connect a free port to a computer. In the field "connect to" I select the item "Computers". And now I have the problem. How can I select the computer to which the networkdevice should be connected ?

Use * for show all devices or directly the name of the device

---

Xavier Caillaud
Blog GLPI Infotel

Udo Rossenfeld

Member

Registered: 2006-09-05

Posts: 3

Re: Problem to connect a Interface to any device

The * was my problem ! Now it works fine.

Thank you for the help !

Regards

Udo