Forum GLPI-Project

lolo73sama

Member

Registered: 2022-03-30

Posts: 14

Agent glpi vbs

Bonjour à tous,

Petit problème, si quelqu'un a la solution.

J'ai installé glpi 10 sur Ubuntu server.
je me sers de l'agent glpi pour remonter les pc.

Je souhaite déployer l'agent, j'ai donc téléchargé la version vbs mais impossible de la faire fonctionner et je n'ai pas d'erreurs..

j'ai juste modifié cette ligne pour quel corresponde avec mon installation.

SetupOptions = "/quiet RUNNOW=1 SERVER='monserveur'"

voici ce qui se passe quand je lance le vbs :

System architecture detected: x64
Setup architecture detected: x64
Installation needed: 1.0
Downloading: lien github
Running: MsiExec.exe /i "C:\Users\LOIC\AppData\Local\Temp\GLPI-Agent-1.0-x64.msi" /quiet RUNNOW=1 SERVER='monserveur'
Scheduling: DEL /Q /F "C:\Users\LOIC\AppData\Local\Temp\GLPI-Agent-1.0-x64.msi"
Deployment done!

***** script completed - exit code: 0 *****

Absolument rien ne se passe, l'agent n'est pas installé, pas de clé dans le registre, et rien ne remonte sur glpi...

je ne sais pas trop quoi faire, merci d'avance à la personne qui pourra m'aider.

voici le code vbs de base vu que je ne peux pas mettre de lien..

'
'
'  ------------------------------------------------------------------------
'

'
'
' Purpose:
'     GLPI Agent Unattended Deployment.
'
'

Option Explicit
Dim Repair, Verbose
Dim Setup, SetupArchitecture, SetupLocation, SetupNightlyLocation, SetupOptions, SetupVersion, RunUninstallFusionInventoryAgent

'
'
' USER SETTINGS
'
'

' SetupVersion
'    Setup version with the pattern <major>.<minor>.<release>[-<package>]
'
SetupVersion = "1.0"

' When using a nightly built version, uncomment the following SetupVersion definition line
' replacing gitABCDEFGH with the most recent git revision found on the nightly builds site
' In that case, SetupNightlyLocation will be selected as location in place of SetupLocation
'SetupVersion = "1.0-gitABCDEFGH"

' SetupLocation
'    Depending on your needs or your environment, you can use either a HTTP or
'    CIFS/SMB.
'
'    If you use HTTP, please, set to SetupLocation a URL:
'
'       SetupLocation = "http://host[:port]/[absolut_path]" or
'       SetupLocation = "https://host[:port]/[absolut_path]"
'
'    If you use CIFS, please, set to SetupLocation a UNC path name:
'
'       SetupLocation = "\\host\share\[path]"
'
'       You also must be sure that you have removed the "Open File Security Warning"
'       from programs accessed from that UNC.
'
' Location for Release Candidates
SetupLocation = "https://github.com/glpi-project/glpi-agent/releases/download/" & SetupVersion

' Location for Nightly Builds
SetupNightlyLocation = "https://nightly.glpi-project.org/glpi-agent"


' SetupArchitecture
'    The setup architecture can be 'x86', 'x64' or 'Auto'
'
'    If you set SetupArchitecture = "Auto" be sure that both installers are in
'    the same SetupLocation.
'
SetupArchitecture = "Auto"

' SetupOptions
'    Consult the online installer documentation to know its list of options.
'    See: https://glpi-agent.readthedocs.io/en/latest/installation/windows-command-line.html#command-line-parameters
'
'    You should use simple quotes (') to set between quotation marks those values
'    that require it; double quotes (") doesn't work with UNCs.
'
SetupOptions = "/quiet RUNNOW=1 SERVER='http://glpi.yourcompany.com/front/inventory.php'"
'SetupOptions = "/quiet RUNNOW=1 SERVER='http://glpi.yourcompany.com/plugins/fusioninventory'"

' Setup
'    The installer file name. You should not have to modify this variable ever.
'
Setup = "GLPI-Agent-" & SetupVersion & "-" & SetupArchitecture & ".msi"

' Repair
'    Repair the installation when Setup is still installed.
'
Repair = "No"

' Verbose
'    Enable or disable the information messages.
'
'    It's advisable to use Verbose = "Yes" with 'cscript //nologo ...'.
'
Verbose = "No"

' RunUninstallFusionInventoryAgent
'    Set to "Yes" to first uninstall FusionInventory Agent
'    Also and unless SERVER or LOCAL are defined in SetupOptions, this script
'    will try to get them from FusionInventory-Agent configuration found in registry
'
RunUninstallFusionInventoryAgent = "No"

'
'
' DO NOT EDIT BELOW
'
'

Function hasOption(opt)
   Dim regEx
   Set regEx = New RegExp
   regEx.Global = true
   regEx.IgnoreCase = False
   regEx.Pattern = "\b" & opt & "=.+\b"
   hasOption = regEx.Test(SetupOptions)
End Function

Function uninstallFusionInventoryAgent()
    Dim Uninstall, getValue

    ' Try to get SERVER and LOCAL from FIA configuration in registry if needed
    If not hasOption("SERVER") then
        On error resume next
        getValue = WshShell.RegRead("HKEY_LOCAL_MACHINE\SOFTWARE\FusionInventory-Agent\server")
        If err.number = 0 And getValue <> "" then
           SetupOptions = SetupOptions & " SERVER='" & getValue & "'"
        End If
    End If
    If not hasOption("LOCAL") then
        On error resume next
        getValue = WshShell.RegRead("HKEY_LOCAL_MACHINE\SOFTWARE\FusionInventory-Agent\local")
        If err.number = 0 And getValue <> "" then
           SetupOptions = SetupOptions & " LOCAL='" & getValue & "'"
        End If
    End If

    ' Verify normal case
    On error resume next
    Uninstall = WshShell.RegRead("HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\FusionInventory-Agent\UninstallString")
    If err.number = 0 then
        WshShell.Run "CMD.EXE /C net stop FusionInventory-Agent",0,True
        WshShell.Run "CMD.EXE /C """ & Uninstall & """ /S /NOSPLASH",0,True
        WshShell.Run "CMD.EXE /C rmdir ""%ProgramFiles%\FusionInventory-Agent"" /S /Q",0,True
    End If

    ' Verify FIA x86 is installed on x64 OS
    On error resume next
    Uninstall = WshShell.RegRead("HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\Uninstall\FusionInventory-Agent\UninstallString")
    If err.number = 0 then
        WshShell.Run "CMD.EXE /C net stop FusionInventory-Agent",0,True
        WshShell.Run "CMD.EXE /C """ & Uninstall & """ /S /NOSPLASH",0,True
        WshShell.Run "CMD.EXE /C rmdir ""%ProgramFiles(x86)%\FusionInventory-Agent"" /S /Q",0,True
    End If
End Function

Function AdvanceTime(nMinutes)
   Dim nMinimalMinutes, dtmTimeFuture
   ' As protection
   nMinimalMinutes = 5
   If nMinutes < nMinimalMinutes Then
      nMinutes = nMinimalMinutes
   End If
   ' Add nMinutes to the current time
   dtmTimeFuture = DateAdd ("n", nMinutes, Time)
   ' Format the result value
   '    The command AT accepts 'HH:MM' values only
   AdvanceTime = Hour(dtmTimeFuture) & ":" & Minute(dtmTimeFuture)
End Function

Function baseName (strng)
   Dim regEx
   Set regEx = New RegExp
   regEx.Global = true
   regEx.IgnoreCase = True
   regEx.Pattern = ".*[/\\]([^/\\]+)$"
   baseName = regEx.Replace(strng,"$1")
End Function

Function GetSystemArchitecture()
   Dim strSystemArchitecture
   Err.Clear
   ' Get operative system architecture
   On Error Resume Next
   strSystemArchitecture = CreateObject("WScript.Shell").ExpandEnvironmentStrings("%PROCESSOR_ARCHITECTURE%")
   If Err.Number = 0 Then
      ' Check the operative system architecture
      Select Case strSystemArchitecture
         Case "x86"
            ' The system architecture is 32-bit
            GetSystemArchitecture = "x86"
         Case "AMD64"
            ' The system architecture is 64-bit
            GetSystemArchitecture = "x64"
         Case Else
            ' The system architecture is not supported
            GetSystemArchitecture = "NotSupported"
      End Select
   Else
      ' It has been not possible to get the system architecture
      GetSystemArchitecture = "Unknown"
   End If
End Function

Function isHttp(strng)
   Dim regEx, matches
   Set regEx = New RegExp
   regEx.Global = true
   regEx.IgnoreCase = True
   regEx.Pattern = "^(http(s?)).*"
   If regEx.Execute(strng).count > 0 Then
      isHttp = True
   Else
      isHttp = False
   End If
   Exit Function
End Function

Function isNightly(strng)
   Dim regEx, matches
   Set regEx = New RegExp
   regEx.Global = true
   regEx.IgnoreCase = True
   regEx.Pattern = "-(git[0-9a-f]{8})$"
   If regEx.Execute(strng).count > 0 Then
      isNightly = True
   Else
      isNightly = False
   End If
   Exit Function
End Function

Function IsInstallationNeeded(strSetupVersion, strSetupArchitecture, strSystemArchitecture)
   Dim strCurrentSetupVersion
   ' Compare the current version, whether it exists, with strSetupVersion
   If strSystemArchitecture = "x86" Then
      ' The system architecture is 32-bit
      ' Check if the subkey 'SOFTWARE\GLPI-Agent\Installer' exists
      On error resume next
      strCurrentSetupVersion = WshShell.RegRead("HKEY_LOCAL_MACHINE\SOFTWARE\GLPI-Agent\Installer\Version")
      If Err.Number = 0 Then
      ' The subkey 'SOFTWARE\GLPI-Agent\Installer' exists
         If strCurrentSetupVersion <> strSetupVersion Then
            ShowMessage("Installation needed: " & strCurrentSetupVersion & " -> " & strSetupVersion)
            IsInstallationNeeded = True
         End If
         Exit Function
      Else
      ' The subkey 'SOFTWARE\GLPI-Agent\Installer' doesn't exist
         Err.Clear
         ShowMessage("Installation needed: " & strSetupVersion)
         IsInstallationNeeded = True
      End If
   Else
      ' The system architecture is 64-bit
      ' Check if the subkey 'SOFTWARE\Wow6432Node\GLPI-Agent\Installer' exists
      On error resume next
      strCurrentSetupVersion = WshShell.RegRead("HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\GLPI-Agent\Installer\Version")
      If Err.Number = 0 Then
      ' The subkey 'SOFTWARE\Wow6432Node\GLPI-Agent\Installer' exists
         If strCurrentSetupVersion <> strSetupVersion Then
            ShowMessage("Installation needed: " & strCurrentSetupVersion & " -> " & strSetupVersion)
            IsInstallationNeeded = True
         End If
         Exit Function
      Else
         ' The subkey 'SOFTWARE\Wow6432Node\GLPI-Agent\Installer' doesn't exist
         Err.Clear
         ' Check if the subkey 'SOFTWARE\GLPI-Agent\Installer' exists
         On error resume next
         strCurrentSetupVersion = WshShell.RegRead("HKEY_LOCAL_MACHINE\SOFTWARE\GLPI-Agent\Installer\Version")
         If Err.Number = 0 Then
         ' The subkey 'SOFTWARE\GLPI-Agent\Installer' exists
            If strCurrentSetupVersion <> strSetupVersion Then
               ShowMessage("Installation needed: " & strCurrentSetupVersion & " -> " & strSetupVersion)
               IsInstallationNeeded = True
            End If
            Exit Function
         Else
            ' The subkey 'SOFTWARE\GLPI-Agent\Installer' doesn't exist
            Err.Clear
            ShowMessage("Installation needed: " & strSetupVersion)
            IsInstallationNeeded = True
         End If
      End If
   End If
End Function

Function IsSelectedRepair()
   If LCase(Repair) <> "no" Then
      ShowMessage("Installation repairing: " & SetupVersion)
      IsSelectedRepair = True
   Else
      IsSelectedRepair = False
   End If
End Function

' http://www.ericphelps.com/scripting/samples/wget/index.html
Function SaveWebBinary(strSetupLocation, strSetup)
   Const adTypeBinary = 1
   Const adSaveCreateOverWrite = 2
   Const ForWriting = 2
   Dim web, varByteArray, strData, strBuffer, lngCounter, ado, strUrl
   strUrl = strSetupLocation & "/" & strSetup
   'On Error Resume Next
   'Download the file with any available object
   Err.Clear
   Set web = Nothing
   Set web = CreateObject("WinHttp.WinHttpRequest.5.1")
   If web Is Nothing Then Set web = CreateObject("WinHttp.WinHttpRequest")
   If web Is Nothing Then Set web = CreateObject("MSXML2.ServerXMLHTTP")
   If web Is Nothing Then Set web = CreateObject("Microsoft.XMLHTTP")
   web.Open "GET", strURL, False
   web.Send
   If Err.Number <> 0 Then
      SaveWebBinary = False
      Set web = Nothing
      Exit Function
   End If
   If web.Status <> "200" Then
      SaveWebBinary = False
      Set web = Nothing
      Exit Function
   End If
   varByteArray = web.ResponseBody
   Set web = Nothing
   'Now save the file with any available method
   On Error Resume Next
   Set ado = Nothing
   Set ado = CreateObject("ADODB.Stream")
   If ado Is Nothing Then
      Set fs = CreateObject("Scripting.FileSystemObject")
      Set ts = fs.OpenTextFile(baseName(strUrl), ForWriting, True)
      strData = ""
      strBuffer = ""
      For lngCounter = 0 to UBound(varByteArray)
         ts.Write Chr(255 And Ascb(Midb(varByteArray,lngCounter + 1, 1)))
      Next
      ts.Close
   Else
      ado.Type = adTypeBinary
      ado.Open
      ado.Write varByteArray
      ado.SaveToFile CreateObject("WScript.Shell").ExpandEnvironmentStrings("%TEMP%") & "\" & strSetup, adSaveCreateOverWrite
      ado.Close
   End If
   SaveWebBinary = True
End Function

Function ShowMessage(strMessage)
   If LCase(Verbose) <> "no" Then
      WScript.Echo strMessage
   End If
End Function

'
'
' MAIN
'
'

Dim nMinutesToAdvance, strCmd, strSystemArchitecture, strTempDir, WshShell, strInstallOrRepair, bInstall
Set WshShell = WScript.CreateObject("WScript.shell")

nMinutesToAdvance = 5

If RunUninstallFusionInventoryAgent = "Yes" Then
    uninstallFusionInventoryAgent()
End If

' Get system architecture
strSystemArchitecture = GetSystemArchitecture()
If (strSystemArchitecture <> "x86") And (strSystemArchitecture <> "x64") Then
   ShowMessage("The system architecture is unknown or not supported.")
   ShowMessage("Deployment aborted!")
   WScript.Quit 1
Else
   ShowMessage("System architecture detected: " & strSystemArchitecture)
End If

' Check and auto detect SetupArchitecture
Select Case LCase(SetupArchitecture)
   Case "x86"
      ' The setup architecture is 32-bit
      SetupArchitecture = "x86"
      Setup = Replace(Setup, "x86", SetupArchitecture, 1, 1, vbTextCompare)
      ShowMessage("Setup architecture: " & SetupArchitecture)
   Case "x64"
      ' The setup architecture is 64-bit
      SetupArchitecture = "x64"
      Setup = Replace(Setup, "x64", SetupArchitecture, 1, 1, vbTextCompare)
      ShowMessage("Setup architecture: " & SetupArchitecture)
   Case "auto"
      ' Auto detection of SetupArchitecture
      SetupArchitecture = strSystemArchitecture
      Setup = Replace(Setup, "Auto", SetupArchitecture, 1, 1, vbTextCompare)
      ShowMessage("Setup architecture detected: " & SetupArchitecture)
   Case Else
      ' The setup architecture is not supported
      ShowMessage("The setup architecture '" & SetupArchitecture & "' is not supported.")
      WScript.Quit 2
End Select

' Check the relation between strSystemArchitecture and SetupArchitecture
If (strSystemArchitecture = "x86") And (SetupArchitecture = "x64") Then
   ' It isn't possible to execute a 64-bit setup on a 32-bit operative system
   ShowMessage("It isn't possible to execute a 64-bit setup on a 32-bit operative system.")
   ShowMessage("Deployment aborted!")
   WScript.Quit 3
End If

bInstall = False
strInstallOrRepair = "/i"

If IsInstallationNeeded(SetupVersion, SetupArchitecture, strSystemArchitecture) Then
   bInstall = True
ElseIf IsSelectedRepair() Then
   strInstallOrRepair = "/fa"
   bInstall = True
End If

If bInstall Then
   If isNightly(SetupVersion) Then
      SetupLocation = SetupNightlyLocation
   End If
   If isHttp(SetupLocation) Then
      ShowMessage("Downloading: " & SetupLocation & "/" & Setup)
      If SaveWebBinary(SetupLocation, Setup) Then
         strCmd = WshShell.ExpandEnvironmentStrings("%ComSpec%")
         strTempDir = WshShell.ExpandEnvironmentStrings("%TEMP%")
         ShowMessage("Running: MsiExec.exe " & strInstallOrRepair & " """ & strTempDir & "\" & Setup & """ " & SetupOptions)
         WshShell.Run "MsiExec.exe " & strInstallOrRepair & " """ & strTempDir & "\" & Setup & """ " & SetupOptions, 0, True
         ShowMessage("Scheduling: DEL /Q /F """ & strTempDir & "\" & Setup & """")
         WshShell.Run "AT.EXE " & AdvanceTime(nMinutesToAdvance) & " " & strCmd & " /C ""DEL /Q /F """"" & strTempDir & "\" & Setup & """""", 0, True
         ShowMessage("Deployment done!")
      Else
         ShowMessage("Error downloading '" & SetupLocation & "\" & Setup & "'!")
      End If
   Else
      ShowMessage("Running: MsiExec.exe " & strInstallOrRepair & " """ & SetupLocation & "\" & Setup & """ " & SetupOptions)
      WshShell.Run "MsiExec.exe " & strInstallOrRepair & " """ & SetupLocation & "\" & Setup & """ " & SetupOptions, 0, True
      ShowMessage("Deployment done!")
   End If
Else
   ShowMessage("It isn't needed the installation of '" & Setup & "'.")
End If

homebrewtainy

Member

Registered: 2020-04-04

Posts: 135

Re: Agent glpi vbs

Bonjour @lolo73sama

As-tu pu essayer avec la dernier version "stable" du package d'installation :
- https:// github.com/glpi-project/glpi-agent/releases/tag/1.1

Ou encore mieux, en utilisant la toute dernière build de l'Agent :
- https:// nightly.glpi-project.org/glpi-agent/
   version GLPI-Agent v1.2-git9418c6ef @ 2022-03-26 02:47:01 UTC

Cordialement.

---

Creuser, creuser... creuser.
GLPI 10.0.12 [ Linux el 9.2 PHP 8.2.x MariaDB 10.5 ] - reverse proxy HTTPS
GLPI Inventory 1.3.3 - Data Injection 2.13.3 - Treeview (Arborescence) 1.10.2

gbougard

Moderator

From: Montpellier, France

Registered: 2021-07-21

Posts: 534

Website

Re: Agent glpi vbs

Salut lolo73sama,

j'allais suggérer la même chose que homebrewtainy: utilises au moins la version 1.1. Pour ça, tu devrais juste changer:

SetupVersion = "1.1"

Mais sinon, as-tu vérifié si tu avais un dossier "C:\Program Files\GLPI-Agent" qui était créé et si oui, si tu y vois un fichier journal dans le sous-dossier "logs" ?

---

GLPI-Agent developer from Teclib' and GLPI-Network team
Previously FusionInventory-Agent maintainer

lolo73sama

Member

Registered: 2022-03-30

Posts: 14

Re: Agent glpi vbs

Merci pour vos réponses,

je ne peux pas utiliser une version Nightly je dois rester sur quelque chose de stable.

J'ai donc testé avec la version 1.1 mais ça n'a pas résolu mon problème c'est toujours pareil, tout s'exécute et rien ne se passe.

j'ai modifié ma ligne pour avoir un fichier log

 SetupOptions = "/quiet DEBUG=1 NO_SSL_CHECK=1 RUNNOW=1 SERVER='https://monsrv'" 

mais aucun dossier glpi-agent n'apparait dans programme files

voici mon mon  code actuel

Purpose:
'     GLPI Agent Unattended Deployment.
'
'

Option Explicit
Dim Repair, Verbose
Dim Setup, SetupArchitecture, SetupLocation, SetupNightlyLocation, SetupOptions, SetupVersion, RunUninstallFusionInventoryAgent

'
'
' USER SETTINGS
'
'

' SetupVersion
'    Setup version with the pattern <major>.<minor>.<release>[-<package>]
'
SetupVersion = "1.1"

' When using a nightly built version, uncomment the following SetupVersion definition line
' replacing gitABCDEFGH with the most recent git revision found on the nightly builds site
' In that case, SetupNightlyLocation will be selected as location in place of SetupLocation
'SetupVersion = "1.0-gitABCDEFGH"

' SetupLocation
'    Depending on your needs or your environment, you can use either a HTTP or
'    CIFS/SMB.
'
'    If you use HTTP, please, set to SetupLocation a URL:
'
'       SetupLocation = "http://host[:port]/[absolut_path]" or
'       SetupLocation = "https://host[:port]/[absolut_path]"
'
'    If you use CIFS, please, set to SetupLocation a UNC path name:
'
'       SetupLocation = "\\host\share\[path]"
'
'       You also must be sure that you have removed the "Open File Security Warning"
'       from programs accessed from that UNC.
'
' Location for Release Candidates
SetupLocation = "https://github.com/glpi-project/glpi-agent/releases/tag/" & SetupVersion

' Location for Nightly Builds
'SetupNightlyLocation = "https://nightly.glpi-project.org/glpi-agent/GLPI-Agent-1.2-git9418c6ef-x64.msi"


' SetupArchitecture
'    The setup architecture can be 'x86', 'x64' or 'Auto'
'
'    If you set SetupArchitecture = "Auto" be sure that both installers are in
'    the same SetupLocation.
'
SetupArchitecture = "x64"

' SetupOptions
'    Consult the online installer documentation to know its list of options.
'    See: https://glpi-agent.readthedocs.io/en/latest/installation/windows-command-line.html#command-line-parameters
'
'    You should use simple quotes (') to set between quotation marks those values
'    that require it; double quotes (") doesn't work with UNCs.
'

SetupOptions = "/QUIET DEBUG=1 NO_SSL_CHECK=1 RUNNOW=1 SERVER='https://monsrv'"

' Setup
'    The installer file name. You should not have to modify this variable ever.
'
Setup = "GLPI-Agent-" & SetupVersion & "-" & SetupArchitecture & ".msi"

' Repair
'    Repair the installation when Setup is still installed.
'
Repair = "No"

' Verbose
'    Enable or disable the information messages.
'
'    It's advisable to use Verbose = "Yes" with 'cscript //nologo ...'.
'
Verbose = "yes"

' RunUninstallFusionInventoryAgent
'    Set to "Yes" to first uninstall FusionInventory Agent
'    Also and unless SERVER or LOCAL are defined in SetupOptions, this script
'    will try to get them from FusionInventory-Agent configuration found in registry
'
RunUninstallFusionInventoryAgent = "No"

'
'
' DO NOT EDIT BELOW
'
'

Function hasOption(opt)
   Dim regEx
   Set regEx = New RegExp
   regEx.Global = true
   regEx.IgnoreCase = False
   regEx.Pattern = "\b" & opt & "=.+\b"
   hasOption = regEx.Test(SetupOptions)
End Function

Function uninstallFusionInventoryAgent()
    Dim Uninstall, getValue

    ' Try to get SERVER and LOCAL from FIA configuration in registry if needed
    If not hasOption("SERVER") then
        On error resume next
        getValue = WshShell.RegRead("HKEY_LOCAL_MACHINE\SOFTWARE\FusionInventory-Agent\server")
        If err.number = 0 And getValue <> "" then
           SetupOptions = SetupOptions & " SERVER='" & getValue & "'"
        End If
    End If
    If not hasOption("LOCAL") then
        On error resume next
        getValue = WshShell.RegRead("HKEY_LOCAL_MACHINE\SOFTWARE\FusionInventory-Agent\local")
        If err.number = 0 And getValue <> "" then
           SetupOptions = SetupOptions & " LOCAL='" & getValue & "'"
        End If
    End If

    ' Verify normal case
    On error resume next
    Uninstall = WshShell.RegRead("HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\FusionInventory-Agent\UninstallString")
    If err.number = 0 then
        WshShell.Run "CMD.EXE /C net stop FusionInventory-Agent",0,True
        WshShell.Run "CMD.EXE /C """ & Uninstall & """ /S /NOSPLASH",0,True
        WshShell.Run "CMD.EXE /C rmdir ""%ProgramFiles%\FusionInventory-Agent"" /S /Q",0,True
    End If

    ' Verify FIA x86 is installed on x64 OS
    On error resume next
    Uninstall = WshShell.RegRead("HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\Uninstall\FusionInventory-Agent\UninstallString")
    If err.number = 0 then
        WshShell.Run "CMD.EXE /C net stop FusionInventory-Agent",0,True
        WshShell.Run "CMD.EXE /C """ & Uninstall & """ /S /NOSPLASH",0,True
        WshShell.Run "CMD.EXE /C rmdir ""%ProgramFiles(x86)%\FusionInventory-Agent"" /S /Q",0,True
    End If
End Function

Function AdvanceTime(nMinutes)
   Dim nMinimalMinutes, dtmTimeFuture
   ' As protection
   nMinimalMinutes = 5
   If nMinutes < nMinimalMinutes Then
      nMinutes = nMinimalMinutes
   End If
   ' Add nMinutes to the current time
   dtmTimeFuture = DateAdd ("n", nMinutes, Time)
   ' Format the result value
   '    The command AT accepts 'HH:MM' values only
   AdvanceTime = Hour(dtmTimeFuture) & ":" & Minute(dtmTimeFuture)
End Function

Function baseName (strng)
   Dim regEx
   Set regEx = New RegExp
   regEx.Global = true
   regEx.IgnoreCase = True
   regEx.Pattern = ".*[/\\]([^/\\]+)$"
   baseName = regEx.Replace(strng,"$1")
End Function

Function GetSystemArchitecture()
   Dim strSystemArchitecture
   Err.Clear
   ' Get operative system architecture
   On Error Resume Next
   strSystemArchitecture = CreateObject("WScript.Shell").ExpandEnvironmentStrings("%PROCESSOR_ARCHITECTURE%")
   If Err.Number = 0 Then
      ' Check the operative system architecture
      Select Case strSystemArchitecture
         Case "x86"
            ' The system architecture is 32-bit
            GetSystemArchitecture = "x86"
         Case "AMD64"
            ' The system architecture is 64-bit
            GetSystemArchitecture = "x64"
         Case Else
            ' The system architecture is not supported
            GetSystemArchitecture = "NotSupported"
      End Select
   Else
      ' It has been not possible to get the system architecture
      GetSystemArchitecture = "Unknown"
   End If
End Function

Function isHttp(strng)
   Dim regEx, matches
   Set regEx = New RegExp
   regEx.Global = true
   regEx.IgnoreCase = True
   regEx.Pattern = "^(http(s?)).*"
   If regEx.Execute(strng).count > 0 Then
      isHttp = True
   Else
      isHttp = False
   End If
   Exit Function
End Function

Function isNightly(strng)
   Dim regEx, matches
   Set regEx = New RegExp
   regEx.Global = true
   regEx.IgnoreCase = True
   regEx.Pattern = "-(git[0-9a-f]{8})$"
   If regEx.Execute(strng).count > 0 Then
      isNightly = True
   Else
      isNightly = False
   End If
   Exit Function
End Function

Function IsInstallationNeeded(strSetupVersion, strSetupArchitecture, strSystemArchitecture)
   Dim strCurrentSetupVersion
   ' Compare the current version, whether it exists, with strSetupVersion
   If strSystemArchitecture = "x86" Then
      ' The system architecture is 32-bit
      ' Check if the subkey 'SOFTWARE\GLPI-Agent\Installer' exists
      On error resume next
      strCurrentSetupVersion = WshShell.RegRead("HKEY_LOCAL_MACHINE\SOFTWARE\GLPI-Agent\Installer\Version")
      If Err.Number = 0 Then
      ' The subkey 'SOFTWARE\GLPI-Agent\Installer' exists
         If strCurrentSetupVersion <> strSetupVersion Then
            ShowMessage("Installation needed: " & strCurrentSetupVersion & " -> " & strSetupVersion)
            IsInstallationNeeded = True
         End If
         Exit Function
      Else
      ' The subkey 'SOFTWARE\GLPI-Agent\Installer' doesn't exist
         Err.Clear
         ShowMessage("Installation needed: " & strSetupVersion)
         IsInstallationNeeded = True
      End If
   Else
      ' The system architecture is 64-bit
      ' Check if the subkey 'SOFTWARE\Wow6432Node\GLPI-Agent\Installer' exists
      On error resume next
      strCurrentSetupVersion = WshShell.RegRead("HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\GLPI-Agent\Installer\Version")
      If Err.Number = 0 Then
      ' The subkey 'SOFTWARE\Wow6432Node\GLPI-Agent\Installer' exists
         If strCurrentSetupVersion <> strSetupVersion Then
            ShowMessage("Installation needed: " & strCurrentSetupVersion & " -> " & strSetupVersion)
            IsInstallationNeeded = True
         End If
         Exit Function
      Else
         ' The subkey 'SOFTWARE\Wow6432Node\GLPI-Agent\Installer' doesn't exist
         Err.Clear
         ' Check if the subkey 'SOFTWARE\GLPI-Agent\Installer' exists
         On error resume next
         strCurrentSetupVersion = WshShell.RegRead("HKEY_LOCAL_MACHINE\SOFTWARE\GLPI-Agent\Installer\Version")
         If Err.Number = 0 Then
         ' The subkey 'SOFTWARE\GLPI-Agent\Installer' exists
            If strCurrentSetupVersion <> strSetupVersion Then
               ShowMessage("Installation needed: " & strCurrentSetupVersion & " -> " & strSetupVersion)
               IsInstallationNeeded = True
            End If
            Exit Function
         Else
            ' The subkey 'SOFTWARE\GLPI-Agent\Installer' doesn't exist
            Err.Clear
            ShowMessage("Installation needed: " & strSetupVersion)
            IsInstallationNeeded = True
         End If
      End If
   End If
End Function

Function IsSelectedRepair()
   If LCase(Repair) <> "no" Then
      ShowMessage("Installation repairing: " & SetupVersion)
      IsSelectedRepair = True
   Else
      IsSelectedRepair = False
   End If
End Function

' http://www.ericphelps.com/scripting/samples/wget/index.html
Function SaveWebBinary(strSetupLocation, strSetup)
   Const adTypeBinary = 1
   Const adSaveCreateOverWrite = 2
   Const ForWriting = 2
   Dim web, varByteArray, strData, strBuffer, lngCounter, ado, strUrl
   strUrl = strSetupLocation & "/" & strSetup
   'On Error Resume Next
   'Download the file with any available object
   Err.Clear
   Set web = Nothing
   Set web = CreateObject("WinHttp.WinHttpRequest.5.1")
   If web Is Nothing Then Set web = CreateObject("WinHttp.WinHttpRequest")
   If web Is Nothing Then Set web = CreateObject("MSXML2.ServerXMLHTTP")
   If web Is Nothing Then Set web = CreateObject("Microsoft.XMLHTTP")
   web.Open "GET", strURL, False
   web.Send
   If Err.Number <> 0 Then
      SaveWebBinary = False
      Set web = Nothing
      Exit Function
   End If
   If web.Status <> "200" Then
      SaveWebBinary = False
      Set web = Nothing
      Exit Function
   End If
   varByteArray = web.ResponseBody
   Set web = Nothing
   'Now save the file with any available method
   On Error Resume Next
   Set ado = Nothing
   Set ado = CreateObject("ADODB.Stream")
   If ado Is Nothing Then
      Set fs = CreateObject("Scripting.FileSystemObject")
      Set ts = fs.OpenTextFile(baseName(strUrl), ForWriting, True)
      strData = ""
      strBuffer = ""
      For lngCounter = 0 to UBound(varByteArray)
         ts.Write Chr(255 And Ascb(Midb(varByteArray,lngCounter + 1, 1)))
      Next
      ts.Close
   Else
      ado.Type = adTypeBinary
      ado.Open
      ado.Write varByteArray
      ado.SaveToFile CreateObject("WScript.Shell").ExpandEnvironmentStrings("%TEMP%") & "\" & strSetup, adSaveCreateOverWrite
      ado.Close
   End If
   SaveWebBinary = True
End Function

Function ShowMessage(strMessage)
   If LCase(Verbose) <> "no" Then
      WScript.Echo strMessage
   End If
End Function

'
'
' MAIN
'
'

Dim nMinutesToAdvance, strCmd, strSystemArchitecture, strTempDir, WshShell, strInstallOrRepair, bInstall
Set WshShell = WScript.CreateObject("WScript.shell")

nMinutesToAdvance = 5

If RunUninstallFusionInventoryAgent = "Yes" Then
    uninstallFusionInventoryAgent()
End If

' Get system architecture
strSystemArchitecture = GetSystemArchitecture()
If (strSystemArchitecture <> "x86") And (strSystemArchitecture <> "x64") Then
   ShowMessage("The system architecture is unknown or not supported.")
   ShowMessage("Deployment aborted!")
   WScript.Quit 1
Else
   ShowMessage("System architecture detected: " & strSystemArchitecture)
End If

' Check and auto detect SetupArchitecture
Select Case LCase(SetupArchitecture)
   Case "x86"
      ' The setup architecture is 32-bit
      SetupArchitecture = "x86"
      Setup = Replace(Setup, "x86", SetupArchitecture, 1, 1, vbTextCompare)
      ShowMessage("Setup architecture: " & SetupArchitecture)
   Case "x64"
      ' The setup architecture is 64-bit
      SetupArchitecture = "x64"
      Setup = Replace(Setup, "x64", SetupArchitecture, 1, 1, vbTextCompare)
      ShowMessage("Setup architecture: " & SetupArchitecture)
   Case "auto"
      ' Auto detection of SetupArchitecture
      SetupArchitecture = strSystemArchitecture
      Setup = Replace(Setup, "Auto", SetupArchitecture, 1, 1, vbTextCompare)
      ShowMessage("Setup architecture detected: " & SetupArchitecture)
   Case Else
      ' The setup architecture is not supported
      ShowMessage("The setup architecture '" & SetupArchitecture & "' is not supported.")
      WScript.Quit 2
End Select

' Check the relation between strSystemArchitecture and SetupArchitecture
If (strSystemArchitecture = "x86") And (SetupArchitecture = "x64") Then
   ' It isn't possible to execute a 64-bit setup on a 32-bit operative system
   ShowMessage("It isn't possible to execute a 64-bit setup on a 32-bit operative system.")
   ShowMessage("Deployment aborted!")
   WScript.Quit 3
End If

bInstall = False
strInstallOrRepair = "/i"

If IsInstallationNeeded(SetupVersion, SetupArchitecture, strSystemArchitecture) Then
   bInstall = True
ElseIf IsSelectedRepair() Then
   strInstallOrRepair = "/fa"
   bInstall = True
End If

If bInstall Then
   If isNightly(SetupVersion) Then
      SetupLocation = SetupNightlyLocation
   End If
   If isHttp(SetupLocation) Then
      ShowMessage("Downloading: " & SetupLocation & "/" & Setup)
      If SaveWebBinary(SetupLocation, Setup) Then
         strCmd = WshShell.ExpandEnvironmentStrings("%ComSpec%")
         strTempDir = WshShell.ExpandEnvironmentStrings("%TEMP%")
         ShowMessage("Running: MsiExec.exe " & strInstallOrRepair & " """ & strTempDir & "\" & Setup & """ " & SetupOptions)
         WshShell.Run "MsiExec.exe " & strInstallOrRepair & " """ & strTempDir & "\" & Setup & """ " & SetupOptions, 0, True
         ShowMessage("Scheduling: DEL /Q /F """ & strTempDir & "\" & Setup & """")
         WshShell.Run "AT.EXE " & AdvanceTime(nMinutesToAdvance) & " " & strCmd & " /C ""DEL /Q /F """"" & strTempDir & "\" & Setup & """""", 0, True
         ShowMessage("Deployment done!")
      Else
         ShowMessage("Error downloading '" & SetupLocation & "\" & Setup & "'!")
      End If
   Else
      ShowMessage("Running: MsiExec.exe " & strInstallOrRepair & " """ & SetupLocation & "\" & Setup & """ " & SetupOptions)
      WshShell.Run "MsiExec.exe " & strInstallOrRepair & " """ & SetupLocation & "\" & Setup & """ " & SetupOptions, 0, True
      ShowMessage("Deployment done!")
   End If
Else
   ShowMessage("It isn't needed the installation of '" & Setup & "'.")
End If

lolo73sama

Member

Registered: 2022-03-30

Posts: 14

Re: Agent glpi vbs

J'ai pris la nouvelle version vbs sur le site,
le problème :
si je supprime \quiet ça marche mais je veux installer en mode silencieux..
en mode silencieux rien ne se passe..

 
'
'  ------------------------------------------------------------------------
'  glpi-agent-deployment.vbs
'  Copyright (C) 2010-2017 by the FusionInventory Development Team.
'  Copyright (C) 2021 by the Teclib SAS
'  ------------------------------------------------------------------------
'
'  LICENSE
'
'  This file is part of GLPI Agent project.
'
'  This file is free software; you can redistribute it and/or modify it
'  under the terms of the GNU General Public License as published by the
'  Free Software Foundation; either version 2 of the License, or (at your
'  option) any later version.
'
'
'  This file is distributed in the hope that it will be useful, but WITHOUT
'  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
'  FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
'  more details.
'
'  You should have received a copy of the GNU General Public License
'  along with this program; if not, write to the Free Software Foundation,
'  Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA,
'  or see <http://www.gnu.org/licenses/>.
'
'  ------------------------------------------------------------------------
'
'  @package   GLPI Agent
'  @file      .\contrib\windows\glpi-agent-deployment.vbs
'  @author(s) Benjamin Accary <meldrone@orange.fr>
'             Christophe Pujol <chpujol@gmail.com>
'             Marc Caissial <marc.caissial@zenitique.fr>
'             Tomas Abad <tabadgp@gmail.com>
'             Guillaume Bougard <gbougard@teclib.com>
'  @copyright Copyright (c) 2010-2017 FusionInventory Team
'             Copyright (c) 2021 Teclib SAS
'  @license   GNU GPL version 2 or (at your option) any later version
'             http://www.gnu.org/licenses/old-licenses/gpl-2.0-standalone.html
'  @link      http://www.glpi-project.org/
'  @since     2021
'
'  ------------------------------------------------------------------------
'

'
'
' Purpose:
'     GLPI Agent Unattended Deployment.
'
'

Option Explicit
Dim Repair, Verbose
Dim Setup, SetupArchitecture, SetupLocation, SetupNightlyLocation, SetupOptions, SetupVersion, RunUninstallFusionInventoryAgent

'
'
' USER SETTINGS
'
'

' SetupVersion
'    Setup version with the pattern <major>.<minor>.<release>[-<package>]
'
SetupVersion = "1.1"

' When using a nightly built version, uncomment the following SetupVersion definition line
' replacing gitABCDEFGH with the most recent git revision found on the nightly builds site
' In that case, SetupNightlyLocation will be selected as location in place of SetupLocation
'SetupVersion = "1.0-gitABCDEFGH"

' SetupLocation
'    Depending on your needs or your environment, you can use either a HTTP or
'    CIFS/SMB.
'
'    If you use HTTP, please, set to SetupLocation a URL:
'
'       SetupLocation = "http://host[:port]/[absolut_path]" or
'       SetupLocation = "https://host[:port]/[absolut_path]"
'
'    If you use CIFS, please, set to SetupLocation a UNC path name:
'
'        SetupLocation = "C:"
'
'       You also must be sure that you have removed the "Open File Security Warning"
'       from programs accessed from that UNC.
'
' Location for Release Candidates
SetupLocation = "https://github.com/glpi-project/glpi-agent/releases/download/" & SetupVersion

' Location for Nightly Builds
'SetupNightlyLocation = "https://nightly.glpi-project.org/glpi-agent"


' SetupArchitecture
'    The setup architecture can be 'x86', 'x64' or 'Auto'
'
'    If you set SetupArchitecture = "Auto" be sure that both installers are in
'    the same SetupLocation.
'
SetupArchitecture = "Auto"

' SetupOptions
'    Consult the online installer documentation to know its list of options.
'    See: https://glpi-agent.readthedocs.io/en/latest/installation/windows-command-line.html#command-line-parameters
'
'    You should use simple quotes (') to set between quotation marks those values
'    that require it; double quotes (") doesn't work with UNCs.
'
SetupOptions = "/quiet DEBUG=1 RUNNOW=1 SERVER='https://myserver/'"
'SetupOptions = "/quiet RUNNOW=1 SERVER='http://glpi.yourcompany.com/plugins/fusioninventory'"

' Setup
'    The installer file name. You should not have to modify this variable ever.
'
Setup = "GLPI-Agent-" & SetupVersion & "-" & SetupArchitecture & ".msi"

' Repair
'    Repair the installation when Setup is still installed.
'
Repair = "No"

' Verbose
'    Enable or disable the information messages.
'
'    It's advisable to use Verbose = "Yes" with 'cscript //nologo ...'.
'
Verbose = "yes"

' RunUninstallFusionInventoryAgent
'    Set to "Yes" to first uninstall FusionInventory Agent
'    Also and unless SERVER or LOCAL are defined in SetupOptions, this script
'    will try to get them from FusionInventory-Agent configuration found in registry
'
RunUninstallFusionInventoryAgent = "No"

'
'
' DO NOT EDIT BELOW
'
'

Function hasOption(opt)
   Dim regEx
   Set regEx = New RegExp
   regEx.Global = true
   regEx.IgnoreCase = False
   regEx.Pattern = "\b" & opt & "=.+\b"
   hasOption = regEx.Test(SetupOptions)
End Function

Function uninstallFusionInventoryAgent()
    Dim Uninstall, getValue

    ' Try to get SERVER and LOCAL from FIA configuration in registry if needed
    If not hasOption("SERVER") then
        On error resume next
        getValue = WshShell.RegRead("HKEY_LOCAL_MACHINE\SOFTWARE\FusionInventory-Agent\server")
        If err.number = 0 And getValue <> "" then
           SetupOptions = SetupOptions & " SERVER='" & getValue & "'"
        End If
    End If
    If not hasOption("LOCAL") then
        On error resume next
        getValue = WshShell.RegRead("HKEY_LOCAL_MACHINE\SOFTWARE\FusionInventory-Agent\local")
        If err.number = 0 And getValue <> "" then
           SetupOptions = SetupOptions & " LOCAL='" & getValue & "'"
        End If
    End If

    ' Verify normal case
    On error resume next
    Uninstall = WshShell.RegRead("HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\FusionInventory-Agent\UninstallString")
    If err.number = 0 then
        WshShell.Run "CMD.EXE /C net stop FusionInventory-Agent",0,True
        WshShell.Run "CMD.EXE /C """ & Uninstall & """ /S /NOSPLASH",0,True
        WshShell.Run "CMD.EXE /C rmdir ""%ProgramFiles%\FusionInventory-Agent"" /S /Q",0,True
    End If

    ' Verify FIA x86 is installed on x64 OS
    On error resume next
    Uninstall = WshShell.RegRead("HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\Uninstall\FusionInventory-Agent\UninstallString")
    If err.number = 0 then
        WshShell.Run "CMD.EXE /C net stop FusionInventory-Agent",0,True
        WshShell.Run "CMD.EXE /C """ & Uninstall & """ /S /NOSPLASH",0,True
        WshShell.Run "CMD.EXE /C rmdir ""%ProgramFiles(x86)%\FusionInventory-Agent"" /S /Q",0,True
    End If
End Function

Function AdvanceTime(nMinutes)
   Dim nMinimalMinutes, dtmTimeFuture
   ' As protection
   nMinimalMinutes = 5
   If nMinutes < nMinimalMinutes Then
      nMinutes = nMinimalMinutes
   End If
   ' Add nMinutes to the current time
   dtmTimeFuture = DateAdd ("n", nMinutes, Time)
   ' Format the result value
   '    The command AT accepts 'HH:MM' values only
   AdvanceTime = Hour(dtmTimeFuture) & ":" & Minute(dtmTimeFuture)
End Function

Function baseName (strng)
   Dim regEx
   Set regEx = New RegExp
   regEx.Global = true
   regEx.IgnoreCase = True
   regEx.Pattern = ".*[/\\]([^/\\]+)$"
   baseName = regEx.Replace(strng,"$1")
End Function

Function GetSystemArchitecture()
   Dim strSystemArchitecture
   Err.Clear
   ' Get operative system architecture
   On Error Resume Next
   strSystemArchitecture = CreateObject("WScript.Shell").ExpandEnvironmentStrings("%PROCESSOR_ARCHITECTURE%")
   If Err.Number = 0 Then
      ' Check the operative system architecture
      Select Case strSystemArchitecture
         Case "x86"
            ' The system architecture is 32-bit
            GetSystemArchitecture = "x86"
         Case "AMD64"
            ' The system architecture is 64-bit
            GetSystemArchitecture = "x64"
         Case Else
            ' The system architecture is not supported
            GetSystemArchitecture = "NotSupported"
      End Select
   Else
      ' It has been not possible to get the system architecture
      GetSystemArchitecture = "Unknown"
   End If
End Function

Function isHttp(strng)
   Dim regEx, matches
   Set regEx = New RegExp
   regEx.Global = true
   regEx.IgnoreCase = True
   regEx.Pattern = "^(http(s?)).*"
   If regEx.Execute(strng).count > 0 Then
      isHttp = True
   Else
      isHttp = False
   End If
   Exit Function
End Function

Function isNightly(strng)
   Dim regEx, matches
   Set regEx = New RegExp
   regEx.Global = true
   regEx.IgnoreCase = True
   regEx.Pattern = "-(git[0-9a-f]{8})$"
   If regEx.Execute(strng).count > 0 Then
      isNightly = True
   Else
      isNightly = False
   End If
   Exit Function
End Function

Function IsInstallationNeeded(strSetupVersion, strSetupArchitecture, strSystemArchitecture)
   Dim strCurrentSetupVersion
   ' Compare the current version, whether it exists, with strSetupVersion
   If strSystemArchitecture = "x86" Then
      ' The system architecture is 32-bit
      ' Check if the subkey 'SOFTWARE\GLPI-Agent\Installer' exists
      On error resume next
      strCurrentSetupVersion = WshShell.RegRead("HKEY_LOCAL_MACHINE\SOFTWARE\GLPI-Agent\Installer\Version")
      If Err.Number = 0 Then
      ' The subkey 'SOFTWARE\GLPI-Agent\Installer' exists
         If strCurrentSetupVersion <> strSetupVersion Then
            ShowMessage("Installation needed: " & strCurrentSetupVersion & " -> " & strSetupVersion)
            IsInstallationNeeded = True
         End If
         Exit Function
      Else
      ' The subkey 'SOFTWARE\GLPI-Agent\Installer' doesn't exist
         Err.Clear
         ShowMessage("Installation needed: " & strSetupVersion)
         IsInstallationNeeded = True
      End If
   Else
      ' The system architecture is 64-bit
      ' Check if the subkey 'SOFTWARE\Wow6432Node\GLPI-Agent\Installer' exists
      On error resume next
      strCurrentSetupVersion = WshShell.RegRead("HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\GLPI-Agent\Installer\Version")
      If Err.Number = 0 Then
      ' The subkey 'SOFTWARE\Wow6432Node\GLPI-Agent\Installer' exists
         If strCurrentSetupVersion <> strSetupVersion Then
            ShowMessage("Installation needed: " & strCurrentSetupVersion & " -> " & strSetupVersion)
            IsInstallationNeeded = True
         End If
         Exit Function
      Else
         ' The subkey 'SOFTWARE\Wow6432Node\GLPI-Agent\Installer' doesn't exist
         Err.Clear
         ' Check if the subkey 'SOFTWARE\GLPI-Agent\Installer' exists
         On error resume next
         strCurrentSetupVersion = WshShell.RegRead("HKEY_LOCAL_MACHINE\SOFTWARE\GLPI-Agent\Installer\Version")
         If Err.Number = 0 Then
         ' The subkey 'SOFTWARE\GLPI-Agent\Installer' exists
            If strCurrentSetupVersion <> strSetupVersion Then
               ShowMessage("Installation needed: " & strCurrentSetupVersion & " -> " & strSetupVersion)
               IsInstallationNeeded = True
            End If
            Exit Function
         Else
            ' The subkey 'SOFTWARE\GLPI-Agent\Installer' doesn't exist
            Err.Clear
            ShowMessage("Installation needed: " & strSetupVersion)
            IsInstallationNeeded = True
         End If
      End If
   End If
End Function

Function IsSelectedRepair()
   If LCase(Repair) <> "no" Then
      ShowMessage("Installation repairing: " & SetupVersion)
      IsSelectedRepair = True
   Else
      IsSelectedRepair = False
   End If
End Function

' http://www.ericphelps.com/scripting/samples/wget/index.html
Function SaveWebBinary(strSetupLocation, strSetup)
   Const adTypeBinary = 1
   Const adSaveCreateOverWrite = 2
   Const ForWriting = 2
   Dim web, varByteArray, strData, strBuffer, lngCounter, ado, strUrl
   strUrl = strSetupLocation & "/" & strSetup
   'On Error Resume Next
   'Download the file with any available object
   Err.Clear
   Set web = Nothing
   Set web = CreateObject("WinHttp.WinHttpRequest.5.1")
   If web Is Nothing Then Set web = CreateObject("WinHttp.WinHttpRequest")
   If web Is Nothing Then Set web = CreateObject("MSXML2.ServerXMLHTTP")
   If web Is Nothing Then Set web = CreateObject("Microsoft.XMLHTTP")
   web.Open "GET", strURL, False
   web.Send
   If Err.Number <> 0 Then
      SaveWebBinary = False
      Set web = Nothing
      Exit Function
   End If
   If web.Status <> "200" Then
      SaveWebBinary = False
      Set web = Nothing
      Exit Function
   End If
   varByteArray = web.ResponseBody
   Set web = Nothing
   'Now save the file with any available method
   On Error Resume Next
   Set ado = Nothing
   Set ado = CreateObject("ADODB.Stream")
   If ado Is Nothing Then
      Set fs = CreateObject("Scripting.FileSystemObject")
      Set ts = fs.OpenTextFile(baseName(strUrl), ForWriting, True)
      strData = ""
      strBuffer = ""
      For lngCounter = 0 to UBound(varByteArray)
         ts.Write Chr(255 And Ascb(Midb(varByteArray,lngCounter + 1, 1)))
      Next
      ts.Close
   Else
      ado.Type = adTypeBinary
      ado.Open
      ado.Write varByteArray
      ado.SaveToFile CreateObject("WScript.Shell").ExpandEnvironmentStrings("%TEMP%") & "\" & strSetup, adSaveCreateOverWrite
      ado.Close
   End If
   SaveWebBinary = True
End Function

Function ShowMessage(strMessage)
   If LCase(Verbose) <> "no" Then
      WScript.Echo strMessage
   End If
End Function

'
'
' MAIN
'
'

Dim nMinutesToAdvance, strCmd, strSystemArchitecture, strTempDir, WshShell, strInstallOrRepair, bInstall
Set WshShell = WScript.CreateObject("WScript.shell")

nMinutesToAdvance = 5

If RunUninstallFusionInventoryAgent = "Yes" Then
    uninstallFusionInventoryAgent()
End If

' Get system architecture
strSystemArchitecture = GetSystemArchitecture()
If (strSystemArchitecture <> "x86") And (strSystemArchitecture <> "x64") Then
   ShowMessage("The system architecture is unknown or not supported.")
   ShowMessage("Deployment aborted!")
   WScript.Quit 1
Else
   ShowMessage("System architecture detected: " & strSystemArchitecture)
End If

' Check and auto detect SetupArchitecture
Select Case LCase(SetupArchitecture)
   Case "x86"
      ' The setup architecture is 32-bit
      SetupArchitecture = "x86"
      Setup = Replace(Setup, "x86", SetupArchitecture, 1, 1, vbTextCompare)
      ShowMessage("Setup architecture: " & SetupArchitecture)
   Case "x64"
      ' The setup architecture is 64-bit
      SetupArchitecture = "x64"
      Setup = Replace(Setup, "x64", SetupArchitecture, 1, 1, vbTextCompare)
      ShowMessage("Setup architecture: " & SetupArchitecture)
   Case "auto"
      ' Auto detection of SetupArchitecture
      SetupArchitecture = strSystemArchitecture
      Setup = Replace(Setup, "Auto", SetupArchitecture, 1, 1, vbTextCompare)
      ShowMessage("Setup architecture detected: " & SetupArchitecture)
   Case Else
      ' The setup architecture is not supported
      ShowMessage("The setup architecture '" & SetupArchitecture & "' is not supported.")
      WScript.Quit 2
End Select

' Check the relation between strSystemArchitecture and SetupArchitecture
If (strSystemArchitecture = "x86") And (SetupArchitecture = "x64") Then
   ' It isn't possible to execute a 64-bit setup on a 32-bit operative system
   ShowMessage("It isn't possible to execute a 64-bit setup on a 32-bit operative system.")
   ShowMessage("Deployment aborted!")
   WScript.Quit 3
End If

bInstall = False
strInstallOrRepair = "/i"

If IsInstallationNeeded(SetupVersion, SetupArchitecture, strSystemArchitecture) Then
   bInstall = True
ElseIf IsSelectedRepair() Then
   strInstallOrRepair = "/fa"
   bInstall = True
End If

If bInstall Then
   If isNightly(SetupVersion) Then
      SetupLocation = SetupNightlyLocation
   End If
   If isHttp(SetupLocation) Then
      ShowMessage("Downloading: " & SetupLocation & "/" & Setup)
      If SaveWebBinary(SetupLocation, Setup) Then
         strCmd = WshShell.ExpandEnvironmentStrings("%ComSpec%")
         strTempDir = WshShell.ExpandEnvironmentStrings("%TEMP%")
         ShowMessage("Running: MsiExec.exe " & strInstallOrRepair & " """ & strTempDir & "\" & Setup & """ " & SetupOptions)
         WshShell.Run "MsiExec.exe " & strInstallOrRepair & " """ & strTempDir & "\" & Setup & """ " & SetupOptions, 0, True
         ShowMessage("Scheduling: DEL /Q /F """ & strTempDir & "\" & Setup & """")
         WshShell.Run "AT.EXE " & AdvanceTime(nMinutesToAdvance) & " " & strCmd & " /C ""DEL /Q /F """"" & strTempDir & "\" & Setup & """""", 0, True
         ShowMessage("Deployment done!")
      Else
         ShowMessage("Error downloading '" & SetupLocation & "\" & Setup & "'!")
      End If
   Else
      ShowMessage("Running: MsiExec.exe " & strInstallOrRepair & " """ & SetupLocation & "\" & Setup & """ " & SetupOptions)
      WshShell.Run "MsiExec.exe " & strInstallOrRepair & " """ & SetupLocation & "\" & Setup & """ " & SetupOptions, 0, True
      ShowMessage("Deployment done!")
   End If
Else
   ShowMessage("It isn't needed the installation of '" & Setup & "'.")
End If

gbougard

Moderator

From: Montpellier, France

Registered: 2021-07-21

Posts: 534

Website

Re: Agent glpi vbs

Essaies d'ajouter l'option suivante:

/L*V 'C:\glpi-agent-install.log'

Pour avoir:

SetupOptions = "/L*V 'C:\glpi-agent-install.log' /QUIET DEBUG=1 NO_SSL_CHECK=1 RUNNOW=1 SERVER='https://monsrv'"

Ensuite lance l'installation silencieuse et regarde si tu vois des problèmes dans le fichier "C:\glpi-agent-install.log"

Tu peux aussi vérifier si tu as des infos dans le journal système avec EventViewer.

Last edited by gbougard (2022-04-01 15:56:20)

---

GLPI-Agent developer from Teclib' and GLPI-Network team
Previously FusionInventory-Agent maintainer

lolo73sama

Member

Registered: 2022-03-30

Posts: 14

Re: Agent glpi vbs

Rien non plus tout s'exécute sans erreur mais pas de log

Essaies d'ajouter l'option suivante:

/L*V 'C:\glpi-agent-install.log'

Pour avoir:

SetupOptions = "/L*V 'C:\glpi-agent-install.log' /QUIET DEBUG=1 NO_SSL_CHECK=1 RUNNOW=1 SERVER='https://monsrv'"

Ensuite lance l'installation silencieuse et regarde si tu vois des problèmes dans le fichier "C:\glpi-agent-install.log"

Tu peux aussi vérifier si tu as des infos dans le journal système avec EventViewer.

gbougard

Moderator

From: Montpellier, France

Registered: 2021-07-21

Posts: 534

Website

Re: Agent glpi vbs

Si tu n'as pas de log, c'est que le script n'arrive même pas à lancer l'installeur. Cela signifie qu'il y a probablement une différence entre tes 2 scripts avec et sans "/quiet" ailleurs qui plante le script. Essaies de comparer les 2 scripts pour voir si c'est le cas, sous windows, j'utilise Winmerge pour ce genre de problème car cela donne un diff visuel pratique.

J'imagine du coup que tu ne vois rien dans l'EventViewer système car l'installeur n'est pas lancé.

---

GLPI-Agent developer from Teclib' and GLPI-Network team
Previously FusionInventory-Agent maintainer

lolo73sama

Member

Registered: 2022-03-30

Posts: 14

Re: Agent glpi vbs

il n'y a aucune différence je modifie juste cette ligne je suis dans le même vbs a chaque fois.
j'ai quand même test ton logiciel, j'ai fait une copie et comparé les 2 mais à part cette fameuse ligne rien a signaler

gbougard

Moderator

From: Montpellier, France

Registered: 2021-07-21

Posts: 534

Website

Re: Agent glpi vbs

Je t'avais remis "/quiet" en majuscules alors qu'il me semble que cette option devrait être en minuscule. Je ne suis pas sûr que ça ait de l'importance sous windows et je n'en ai pas sous la main pour retester.

---

GLPI-Agent developer from Teclib' and GLPI-Network team
Previously FusionInventory-Agent maintainer

lolo73sama

Member

Registered: 2022-03-30

Posts: 14

Re: Agent glpi vbs

d'après la doc ça a une importance donc je l'avais déjà remis en minuscule

Je t'avais remis "/quiet" en majuscules alors qu'il me semble que cette option devrait être en minuscule. Je ne suis pas sûr que ça ait de l'importance sous windows et je n'en ai pas sous la main pour retester.

gbougard

Moderator

From: Montpellier, France

Registered: 2021-07-21

Posts: 534

Website

Re: Agent glpi vbs

Et si tu passes le script VBS en mode verbeux, est-ce que ça s'installe et est-ce que tu obtiens le fichier C:\glpi-agent-install.log ?

---

GLPI-Agent developer from Teclib' and GLPI-Network team
Previously FusionInventory-Agent maintainer

lolo73sama

Member

Registered: 2022-03-30

Posts: 14

Re: Agent glpi vbs

il est déjà activé depuis le début

Et si tu passes le script VBS en mode verbeux, est-ce que ça s'installe et est-ce que tu obtiens le fichier C:\glpi-agent-install.log ?