[Résolu] XAMPP - Connexion Automatique par SSO

AX0rion · 2016-03-05 19:02:32

Bonjour à tous,

Je suis sous Windows Server 2008 R2 x64 bits.
Version actuelle de GLPI : 0.84.8

J'ai fais la mise à jour de XAMPP v.5.6.15 :

- Apache 2.4.17
- OpenSSL 1.0.2d
- PHP 5.6.15
- MariaDB (MySQL) 10.1.9-MariaDB

Après avoir fait la mise à jour, j'ai remarqué que le SSO n'était plus activé par défaut et que c'était un peu galère à remettre.
En suivant les forums, j'ai téléchargé les fichiers qu'il fallait.. mais j'ai vraiment du mal sur la configuration.

Quelqu'un pourrait m'éclairer sur les fichiers de configuration ?
J'aimerai par la suite migrer de la version 0.84.8 vers la 0.90.1

Merci
AX0rion

Last edited by AX0rion (2016-03-16 20:26:21)

AX0rion · 2016-03-07 20:45:38

Petit UP !

Quelqu'un peut m'aider ?

AX0rion · 2016-03-10 00:03:56

Re-UP !

Uniyannick · 2016-03-10 15:00:07

Bonjour

oui dispo

Uniyannick · 2016-03-10 15:01:30

le module sso ldap doit etre actif dans httdp.conf et la config suivante :

LoadModule ldap_module modules/mod_ldap.so
LoadModule authnz_sspi_module modules/mod_authnz_sspi.so

renomme en fonction de ton repertoire ou est glpi
#glpi SSO configuration
<Directory "E:\xampp\htdocs\glpi090">
Options None
AllowOverride All
Order allow,deny
Allow from all
#AuthName "Accès restreint"
AuthType SSPI
SSPIAuth On
SSPIAuthoritative On
SSPIOfferBasic On
SSPIOmitDomain On
require valid-user
</Directory>

Last edited by Uniyannick (2016-03-10 15:02:51)

Uniyannick · 2016-03-10 18:51:53

un ptit conseil passe en php 7.04 perf + 50%

avec fastcgi et opcache

Last edited by Uniyannick (2016-03-10 18:52:13)

AX0rion · 2016-03-10 20:30:25

Bonjour Yannick,

Merci pour ta réponse.

Cependant, même après modification, Apache ne veut pas se lancer...

Voici ce que j'ai fais :

1. Ajout du module mod_authnz_sspi.so
2. Modification du fichier "httpd.conf" :
- Liste des modules actifs :

LoadModule access_compat_module modules/mod_access_compat.so
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule allowmethods_module modules/mod_allowmethods.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule authn_core_module modules/mod_authn_core.so
LoadModule authn_file_module modules/mod_authn_file.so
LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule authz_core_module modules/mod_authz_core.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule cgi_module modules/mod_cgi.so
LoadModule dav_lock_module modules/mod_dav_lock.so
LoadModule dir_module modules/mod_dir.so
LoadModule env_module modules/mod_env.so
LoadModule headers_module modules/mod_headers.so
LoadModule include_module modules/mod_include.so
LoadModule info_module modules/mod_info.so
LoadModule isapi_module modules/mod_isapi.so
LoadModule ldap_module modules/mod_ldap.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule cache_disk_module modules/mod_cache_disk.so
LoadModule mime_module modules/mod_mime.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
LoadModule ssl_module modules/mod_ssl.so
LoadModule status_module modules/mod_status.so
LoadModule version_module modules/mod_version.so
LoadModule authnz_sspi_module modules/mod_authnz_sspi.so

- Ajout de la configuration SSO à la fin du fichier "httpd.conf" :

#GLPI SSO Configuration
<Directory "C:\xampp\htdocs\glpi">
  Options None
  AllowOverride All
  Order allow,deny
  Allow from all
  #AuthName "Accès restreint"
  AuthType SSPI
  SSPIAuth On
  SSPIAuthoritative On
  SSPIOfferBasic On
  SSPIOmitDomain On
  require valid-user
</Directory>

En essayant de relancer Apache, je me suis rendu compte que j'avais une erreur :

Log Name:      Application
Source:        Apache Service
Date:          10/03/2016 18:51:57
Event ID:      3299
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      monserver.mondomain
Description:
The Apache service named  reported the following error:
>>> httpd.exe: Syntax error on line 179 of C:/xampp/apache/conf/httpd.conf: Cannot load modules/mod_authnz_sspi.so into server: The Apache service named is not a valid Win32 application.     .
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
  <System>
    <Provider Name="Apache Service" />
    <EventID Qualifiers="0">3299</EventID>
    <Level>2</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2016-03-10T17:51:57.000000000Z" />
    <EventRecordID>24514</EventRecordID>
    <Channel>Application</Channel>
    <Computer>monserver.mondomain</Computer>
    <Security />
  </System>
  <EventData>
    <Data>The Apache service named</Data>
    <Data>
    </Data>
    <Data>reported the following error:
&gt;&gt;&gt;</Data>
    <Data>httpd.exe: Syntax error on line 179 of C:/xampp/apache/conf/httpd.conf: Cannot load modules/mod_authnz_sspi.so into server: %1 is not a valid Win32 application.</Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
  </EventData>
</Event>

D'après l'erreur, il semble que c'est le module mod_authnz_sspi.so qui pose problème..

Pour rappel, je suis sous Windows Server 2008 R2 x64.
Le module mod_authnz_sspi.so est extrait du répertoire x64 bits (Celui que l'on doit télécharger)...

Enjoy !
AX0rion

Uniyannick · 2016-03-11 10:40:16

pour que tout fonctionne tu dois tout mettre en 32 bits

Apache/2.4.3 (Win32) mod_authnz_sspi/0.1.0 OpenSSL/1.0.1c PHP/5.4.7
Version du client de base de données : libmysql - mysqlnd 5.0.10 - 20111026 - $Id: b0b3b15c693b7f6aeb3aa66b646fee339f175e39 $
Extension PHP : mysqli Documentation
Version de PHP : 5.4.7.

Pour ma part j'utilise GLPI 0.91 - Windows 2012 R2 - IIS 7.5 - Mariadb 10.1 - PHP 7.04 - Fusion 2.3.17 - Production prevue avril 2016.

et ca marche tres bien

Uniyannick · 2016-03-11 10:42:15

pour que tout fonctionne tu dois tout mettre en 32 bits

Apache/2.4.3 (Win32) mod_authnz_sspi/0.1.0 OpenSSL/1.0.1c PHP/5.4.7
Version du client de base de données : libmysql - mysqlnd 5.0.10 - 20111026 - $Id: b0b3b15c693b7f6aeb3aa66b646fee339f175e39 $
Extension PHP : mysqli Documentation
Version de PHP : 5.4.7.

Pour ma part j'utilise GLPI 0.91 - Windows 2012 R2 - IIS 7.5 - Mariadb 10.1 - PHP 7.04 - Fusion 2.3.17 - Production prevue avril 2016.

et ca marche tres bien

AX0rion · 2016-03-16 00:04:26

Hello,

Petit retour rapide pour dire que je n'ai pas abandonné le sujet, ou laisser en suspend sans rien dire..
Je n'ai pas encore eu le temps d'essayer.
La mise à jours de XAMPP avec PHP 7.0.4 m'a posé un gros soucis : Impossible de redémarrer APACHE !
Pour faire tourner Apache, Visual C++ Redistributable for Visual Studio 2015 doit être installé (Lien ici : https://www.microsoft.com/en-us/downloa … id=48145).

Je n'avais pas mis le SP1 sur mon Windows Server 2008 R2.. du coup impossible à installer.

Je remets GLPI sur pied en DEV, et je test le SSO.
Je fais un retour dans la semaine !

Thanks a lot !

AX0rion

AX0rion · 2016-03-16 20:39:43

Bonsoir,

Merci à toi Yannick.
GLPI + SSO opérationnel !

RECAPITULATIF
Configuration :
OS : Windows Server 2008 R2 x64 Bits SP1
GLPI : 0.90.1
XAMPP (32 BITS) : Apache : 2.4.18 | mod_authnz_sspi (x86) : 0.1.0 | OpenSSL : 1.0.2e | PHP : 7.0.4

Lien de téléchargement du module sspi (Choisissez le x86) :
https://www.apachehaus.net/modules/mod_authnz_sspi/
Décompresser l'archive, puis dans le répertoire "Apache24\Module\" copiez le fichier mod_authnz_sspi.so dans les modules d'Apache.

Fichiers à modifier :
httpd.conf :
- Dé-commenter la ligne : LoadModule ldap_module modules/mod_ldap.so
- Ajouter la ligne (A la fin de la liste des modules) : LoadModule authnz_sspi_module modules/mod_authnz_sspi.so
- Ajouter le code "#GLPI SSO CONFIGURATION" jusqu'à la fin dans votre fichier (Voir mon fichier ci-dessous).

Voici mon httpd.conf :

#
# This is the main Apache HTTP server configuration file.  It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
# In particular, see 
# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
# for a discussion of each configuration directive.
#
# Do NOT simply read the instructions in here without understanding
# what they do.  They're here only as hints or reminders.  If you are unsure
# consult the online docs. You have been warned.  
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path.  If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/access_log"
# with ServerRoot set to "/usr/local/apache2" will be interpreted by the
# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log" 
# will be interpreted as '/logs/access_log'.
#
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
# If a drive letter is omitted, the drive on which httpd.exe is located
# will be used by default.  It is recommended that you always supply
# an explicit drive letter in absolute paths to avoid confusion.

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# Do not add a slash at the end of the directory path.  If you point
# ServerRoot at a non-local disk, be sure to specify a local disk on the
# Mutex directive, if file-based mutexes are used.  If you wish to share the
# same ServerRoot for multiple httpd daemons, you will need to change at
# least PidFile.
#
ServerRoot "/xampp/apache"

#
# Mutex: Allows you to set the mutex mechanism and mutex file directory
# for individual mutexes, or change the global defaults
#
# Uncomment and change the directory if mutexes are file-based and the default
# mutex file directory is not on a local disk or is not appropriate for some
# other reason.
#
# Mutex default:logs

#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to 
# prevent Apache from glomming onto all bound IP addresses.
#
#Listen 12.34.56.78:80
Listen 80

#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
LoadModule access_compat_module modules/mod_access_compat.so
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule allowmethods_module modules/mod_allowmethods.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule auth_form_module modules/mod_auth_form.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
LoadModule authn_core_module modules/mod_authn_core.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authn_socache_module modules/mod_authn_socache.so
#LoadModule authnz_fcgi_module modules/mod_authnz_fcgi.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule authz_core_module modules/mod_authz_core.so
#LoadModule authz_dbd_module modules/mod_authz_dbd.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_host_module modules/mod_authz_host.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule buffer_module modules/mod_buffer.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule cache_disk_module modules/mod_cache_disk.so
#LoadModule cache_socache_module modules/mod_cache_socache.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule cgi_module modules/mod_cgi.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule data_module modules/mod_data.so
#LoadModule dav_module modules/mod_dav.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule deflate_module modules/mod_deflate.so
LoadModule dir_module modules/mod_dir.so
#LoadModule dumpio_module modules/mod_dumpio.so
LoadModule env_module modules/mod_env.so
#LoadModule expires_module modules/mod_expires.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule filter_module modules/mod_filter.so
#LoadModule http2_module modules/mod_http2.so
LoadModule headers_module modules/mod_headers.so
#LoadModule heartbeat_module modules/mod_heartbeat.so
#LoadModule heartmonitor_module modules/mod_heartmonitor.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule imagemap_module modules/mod_imagemap.so
LoadModule include_module modules/mod_include.so
LoadModule info_module modules/mod_info.so
LoadModule isapi_module modules/mod_isapi.so
#LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
#LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
#LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
#LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
LoadModule ldap_module modules/mod_ldap.so
#LoadModule logio_module modules/mod_logio.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_debug_module modules/mod_log_debug.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule lua_module modules/mod_lua.so
LoadModule cache_disk_module modules/mod_cache_disk.so
#LoadModule macro_module modules/mod_macro.so
LoadModule mime_module modules/mod_mime.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
#LoadModule proxy_express_module modules/mod_proxy_express.so
#LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
#LoadModule proxy_html_module modules/mod_proxy_html.so
#LoadModule proxy_http_module modules/mod_proxy_http.so
#LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
#LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
#LoadModule ratelimit_module modules/mod_ratelimit.so
#LoadModule reflector_module modules/mod_reflector.so
#LoadModule remoteip_module modules/mod_remoteip.so
#LoadModule request_module modules/mod_request.so
#LoadModule reqtimeout_module modules/mod_reqtimeout.so
LoadModule rewrite_module modules/mod_rewrite.so
#LoadModule sed_module modules/mod_sed.so
#LoadModule session_module modules/mod_session.so
#LoadModule session_cookie_module modules/mod_session_cookie.so
#LoadModule session_crypto_module modules/mod_session_crypto.so
#LoadModule session_dbd_module modules/mod_session_dbd.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule slotmem_plain_module modules/mod_slotmem_plain.so
#LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
#LoadModule socache_dbm_module modules/mod_socache_dbm.so
#LoadModule socache_memcache_module modules/mod_socache_memcache.so
LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
#LoadModule speling_module modules/mod_speling.so
LoadModule ssl_module modules/mod_ssl.so
LoadModule status_module modules/mod_status.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule unique_id_module modules/mod_unique_id.so
#LoadModule userdir_module modules/mod_userdir.so
#LoadModule usertrack_module modules/mod_usertrack.so
LoadModule version_module modules/mod_version.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
#LoadModule watchdog_module modules/mod_watchdog.so
#LoadModule xml2enc_module modules/mod_xml2enc.so
LoadModule authnz_sspi_module modules/mod_authnz_sspi.so

<IfModule unixd_module>
#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.  
#
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
#
User daemon
Group daemon

</IfModule>

# 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition.  These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#

#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed.  This address appears on some server-generated pages, such
# as error documents.  e.g. admin@your-domain.com
#
ServerAdmin postmaster@localhost

#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
#
ServerName localhost:80

#
# Deny access to the entirety of your server's filesystem. You must
# explicitly permit access to web content directories in other 
# <Directory> blocks below.
#
<Directory />
    AllowOverride none
    Require all denied
</Directory>

#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#

#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "/xampp/htdocs"
<Directory "/xampp/htdocs">
    #
    # Possible values for the Options directive are "None", "All",
    # or any combination of:
    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
    #
    # Note that "MultiViews" must be named *explicitly* --- "Options All"
    # doesn't give it to you.
    #
    # The Options directive is both complicated and important.  Please see
    # http://httpd.apache.org/docs/2.4/mod/core.html#options
    # for more information.
    #
    Options Indexes FollowSymLinks Includes ExecCGI

    #
    # AllowOverride controls what directives may be placed in .htaccess files.
    # It can be "All", "None", or any combination of the keywords:
    #   AllowOverride FileInfo AuthConfig Limit
    #
    AllowOverride All

    #
    # Controls who can get stuff from this server.
    #
    Require all granted
</Directory>

#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
<IfModule dir_module>
    DirectoryIndex index.php index.pl index.cgi index.asp index.shtml index.html index.htm \
                   default.php default.pl default.cgi default.asp default.shtml default.html default.htm \
                   home.php home.pl home.cgi home.asp home.shtml home.html home.htm
</IfModule>

#
# The following lines prevent .htaccess and .htpasswd files from being 
# viewed by Web clients. 
#
<Files ".ht*">
    Require all denied
</Files>

#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog "logs/error.log"

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn

<IfModule log_config_module>
    #
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    #
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common

    <IfModule logio_module>
      # You need to enable mod_logio.c to use %I and %O
      LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
    </IfModule>

    #
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here.  Contrariwise, if you *do*
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and *not* in this file.
    #
    #CustomLog "logs/access.log" common

    #
    # If you prefer a logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #
    CustomLog "logs/access.log" combined
</IfModule>

<IfModule alias_module>
    #
    # Redirect: Allows you to tell clients about documents that used to 
    # exist in your server's namespace, but do not anymore. The client 
    # will make a new request for the document at its new location.
    # Example:
    # Redirect permanent /foo http://www.example.com/bar

    #
    # Alias: Maps web paths into filesystem paths and is used to
    # access content that does not live under the DocumentRoot.
    # Example:
    # Alias /webpath /full/filesystem/path
    #
    # If you include a trailing / on /webpath then the server will
    # require it to be present in the URL.  You will also likely
    # need to provide a <Directory> section to allow access to
    # the filesystem path.

    #
    # ScriptAlias: This controls which directories contain server scripts. 
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the target directory are treated as applications and
    # run by the server when requested rather than as documents sent to the
    # client.  The same rules about trailing "/" apply to ScriptAlias
    # directives as to Alias.
    #
    ScriptAlias /cgi-bin/ "/xampp/cgi-bin/"

</IfModule>

<IfModule cgid_module>
    #
    # ScriptSock: On threaded servers, designate the path to the UNIX
    # socket used to communicate with the CGI daemon of mod_cgid.
    #
    #Scriptsock cgisock
</IfModule>

#
# "/xampp/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory "/xampp/cgi-bin">
    AllowOverride All
    Options None
    Require all granted
</Directory>

<IfModule mime_module>
    #
    # TypesConfig points to the file containing the list of mappings from
    # filename extension to MIME-type.
    #
    TypesConfig conf/mime.types

    #
    # AddType allows you to add to or override the MIME configuration
    # file specified in TypesConfig for specific file types.
    #
    #AddType application/x-gzip .tgz
    #
    # AddEncoding allows you to have certain browsers uncompress
    # information on the fly. Note: Not all browsers support this.
    #
    #AddEncoding x-compress .Z
    #AddEncoding x-gzip .gz .tgz
    #
    # If the AddEncoding directives above are commented-out, then you
    # probably should define those extensions to indicate media types:
    #
    AddType application/x-compress .Z
    AddType application/x-gzip .gz .tgz

    #
    # AddHandler allows you to map certain file extensions to "handlers":
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action directive (see below)
    #
    # To use CGI scripts outside of ScriptAliased directories:
    # (You will also need to add "ExecCGI" to the "Options" directive.)
    #
    AddHandler cgi-script .cgi .pl .asp

    # For type maps (negotiated resources):
    #AddHandler type-map var

    #
    # Filters allow you to process content before it is sent to the client.
    #
    # To parse .shtml files for server-side includes (SSI):
    # (You will also need to add "Includes" to the "Options" directive.)
    #
    AddType text/html .shtml
    AddOutputFilter INCLUDES .shtml
</IfModule>

#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type.  The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
<IfModule mime_magic_module>
    #
    # The mod_mime_magic module allows the server to use various hints from the
    # contents of the file itself to determine its type.  The MIMEMagicFile
    # directive tells the module where the hint definitions are located.
    #
    MIMEMagicFile "conf/magic"
</IfModule>


#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
#

#
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or one of the special
# values 'default', 'none' or 'unlimited'.
# Default setting is to accept 200 Ranges.
#MaxRanges unlimited

#
# EnableMMAP and EnableSendfile: On systems that support it, 
# memory-mapping or the sendfile syscall may be used to deliver
# files.  This usually improves server performance, but must
# be turned off when serving from networked-mounted 
# filesystems or if support for these functions is otherwise
# broken on your system.
# Defaults: EnableMMAP On, EnableSendfile Off
#
#EnableMMAP off
#EnableSendfile off

# Supplemental configuration
#
# The configuration files in the conf/extra/ directory can be 
# included to add extra features or to modify the default configuration of 
# the server, or you may simply copy their contents here and change as 
# necessary.

# Server-pool management (MPM specific)
Include conf/extra/httpd-mpm.conf

# Multi-language error messages
Include conf/extra/httpd-multilang-errordoc.conf

# Fancy directory listings
Include conf/extra/httpd-autoindex.conf

# Language settings
Include conf/extra/httpd-languages.conf

# User home directories
Include conf/extra/httpd-userdir.conf

# Real-time info on requests and configuration
Include conf/extra/httpd-info.conf

# Virtual hosts
Include conf/extra/httpd-vhosts.conf

# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf

# Distributed authoring and versioning (WebDAV)
#Attention! WEB_DAV is a security risk without a new userspecific configuration for a secure authentifcation 
#Include conf/extra/httpd-dav.conf

# Various default settings
#Include conf/extra/httpd-default.conf
# Implements a proxy/gateway for Apache.
Include "conf/extra/httpd-proxy.conf"
# Various default settings
Include "conf/extra/httpd-default.conf"
# XAMPP settings
Include "conf/extra/httpd-xampp.conf"

# Configure mod_proxy_html to understand HTML4/XHTML1
<IfModule proxy_html_module>
Include conf/extra/proxy-html.conf
</IfModule>

# Secure (SSL/TLS) connections
Include conf/extra/httpd-ssl.conf
#
# Note: The following must must be present to support
#       starting without SSL on platforms with no /dev/random equivalent
#       but a statically compiled-in mod_ssl.
#
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>

# XAMPP: We disable operating system specific optimizations for a listening
# socket by the http protocol here. IE 64 bit make problems without this.

AcceptFilter http none
AcceptFilter https none
# AJP13 Proxy
<IfModule mod_proxy.c>
<IfModule mod_proxy_ajp.c>
Include "conf/extra/httpd-ajp.conf"
</IfModule>
</IfModule>

# GLPI SSO CONFIGURATION
<Directory "C:\xampp\htdocs\glpi">
  Options None
  AllowOverride All
  Order allow,deny
  Allow from all
  #AuthName "Accès restreint"
  AuthType SSPI
  SSPIAuth On
  SSPIAuthoritative On
  SSPIOfferBasic On
  SSPIOmitDomain On
  require valid-user
</Directory>

Last edited by AX0rion (2016-03-16 20:40:42)

Uniyannick · 2016-03-17 12:17:32

Heureux d'avoir pu t'aider.

Bonne journée

dronces · 2018-04-17 18:32:15

IT WORKS!..........!

XAMPP for Windows 7.1.14
PHP Version 7.1.14
Windows NT NAMESERVER 6.3 build 9600 (Windows Server 2012 R2 Standard Edition) i586
Apache 2.0/2.4.29 (Win32) mod_authnz_sspi/0.1.1 OpenSSL/1.0.2n PHP/7.1.14
Versión del cliente de base de datos: libmysql - mysqlnd 5.0.12-dev - 20150407

httpd.conf
LoadModule ldap_module modules/mod_ldap.so
LoadModule authnz_sspi_module modules/mod_authnz_sspi.so

Al Final de httpd.conf

#GLPI SSO Configuration
<Directory "C:\xampp\htdocs\glpi">
Options None
AllowOverride All
Order allow,deny
Allow from all
#AuthName "Accès restreint"
AuthType SSPI
SSPIAuth On
SSPIAuthoritative On
SSPIOfferBasic On
SSPIOmitDomain On
require valid-user
</Directory>

=====================================
al final de C:\xampp\htdocs\glpi\.htaccess, agregar:

<ifModule mod_auth_sspi.c>
Options None
Order allow,deny
Allow from all

AuthName "Accès restreint"
AuthType SSPI
SSPIAuth On
SSPIAuthoritative On
SSPIOfferBasic On
SSPIPerRequestAuth On
require valid-user
</ifModule>

===================
en GLPI

Inicio-Configuración-Autenticación-Otros-Campo de almacenamiento de datos de ingreso en la solicitud HTTP
REMOTE_USER

RESTART APACHE

funciona con IExplorer y Chrome

Forum GLPI-Project

Announcement

#1 2016-03-05 19:02:32

[Résolu] XAMPP - Connexion Automatique par SSO

#2 2016-03-07 20:45:38

Re: [Résolu] XAMPP - Connexion Automatique par SSO

#3 2016-03-10 00:03:56

Re: [Résolu] XAMPP - Connexion Automatique par SSO

#4 2016-03-10 15:00:07

Re: [Résolu] XAMPP - Connexion Automatique par SSO

#5 2016-03-10 15:01:30

Re: [Résolu] XAMPP - Connexion Automatique par SSO

#6 2016-03-10 18:51:53

Re: [Résolu] XAMPP - Connexion Automatique par SSO

#7 2016-03-10 20:30:25

Re: [Résolu] XAMPP - Connexion Automatique par SSO

#8 2016-03-11 10:40:16

Re: [Résolu] XAMPP - Connexion Automatique par SSO

#9 2016-03-11 10:42:15

Re: [Résolu] XAMPP - Connexion Automatique par SSO

#10 2016-03-16 00:04:26

Re: [Résolu] XAMPP - Connexion Automatique par SSO

#11 2016-03-16 20:39:43

Re: [Résolu] XAMPP - Connexion Automatique par SSO

#12 2016-03-17 12:17:32

Re: [Résolu] XAMPP - Connexion Automatique par SSO

#13 2018-04-17 18:32:15

Re: [Résolu] XAMPP - Connexion Automatique par SSO

Board footer