Ip addressing + DHCP scopes

MagiconeXXX · 2008-04-15 22:40:02

Hi all

I am trying to manage IP addresses for our networks, and the IP addressing report is very useful. However, I can't find a way to reserve an IP address or create a dhcp scope that will show up in a report.

For instance, given the ip range 192.168.55.0/24, i would like to carve out the first 200 addresses for a DHCP scope. I don't see a way to do that without tying those IP's to a physical device. I don't see an easy way to create a fake computer, call it the DHCP scope, and quickly assign 200 IP addresses to it.

Is there a workaround for this? Can this be added as a feature?

Thanks!

tsmr · 2008-04-15 23:08:57

At this moment you can only say that an ip is reserved with add 'reserv' word in the name of the port of an item.

7andY · 2008-04-16 10:35:09

Ahhhhhhhh - so that's how it's done! Many thanks for that.

Is it possible to show IPs from multiple subnets? We use 10.7.92.0 to 10.7.95.255 and I would like to be able to see all my IPs on one page, instead of having to use four different reports.

Many thanks, Andy E.

tsmr · 2008-04-16 12:00:35

with next version with glpi 0.71 yes

7andY · 2008-04-16 15:24:17

...and I cannot see how to reserve an address for a Network Device. Even if I add a Network port and put 'reserv' against it, it still doesn't show up as 'Reserved Address'.

Many thanks, Andy E.

MagiconeXXX · 2008-04-16 15:52:15

Is there any way to massively create the IP address range, then? I can create 100 ports at a time, but I don't see a way to assign an IP range without hand-keying in 200 addresses

Forum GLPI-Project

Announcement

#1 2008-04-15 22:40:02

Ip addressing + DHCP scopes

#2 2008-04-15 23:08:57

Re: Ip addressing + DHCP scopes

#3 2008-04-16 10:35:09

Re: Ip addressing + DHCP scopes

#4 2008-04-16 12:00:35

Re: Ip addressing + DHCP scopes

#5 2008-04-16 15:24:17

Re: Ip addressing + DHCP scopes

#6 2008-04-16 15:52:15

Re: Ip addressing + DHCP scopes

Board footer