ocs auto synchronizing, still not working

yvesdm · 2008-02-11 10:46:55

I still have problems with the auto-synchronization.
Computers get updated from ocs and appear in the list at page glpi/front/ocsng.sync.php
But I always have to click the "synchronize" button to get the synchronisation done. I want this to happen automatically. Same for new computers...

Any idea's?
Kind regards,
Yves

Last edited by yvesdm (2008-02-11 10:49:05)

wawa · 2008-02-11 10:52:52

hello
you can use cron integrating in glpi (configuration in mode ocsng) or use the mass_ocs_import plugin do launch script in the crontab

yvesdm · 2008-02-11 11:04:41

wawa wrote:

hello
you can use cron integrating in glpi (configuration in mode ocsng)

This is enabled, that's the problem :-)
It's set to import 10 computers, but doesn't seem to do it.

wawa wrote:

or use the mass_ocs_import plugin do launch script in the crontab

I installed that plugin b4 but can't configure it in glpi 0.70.2, so I'm kind of stuck here.

kind regards

wawa · 2008-02-11 11:08:21

yvesdm wrote:

I installed that plugin b4 but can't configure it in glpi 0.70.2, so I'm kind of stuck here.

what do you mean ? what doesn't work ?

yvesdm · 2008-02-11 12:07:00

wawa wrote:

yvesdm wrote:
I installed that plugin b4 but can't configure it in glpi 0.70.2, so I'm kind of stuck here.
what do you mean ? what doesn't work ?

For the plugin:
When I go to plugins, I see the ocs mass import plugin installed, but there's nothing I can do with it.
When I click it I get the line "Configuration of plugin OCS Massive import" but that's it, I can't do anything. No further buttons or fields...

For the normal autom. sync:
I always have to click the "synchronize" button to get the synchronisation done
So updated/new computers appear in a list, but I have to click "Synchronize" If I don't click synchronize the list just keeps growing. You know what I mean?

Kind regards
Yves

Last edited by yvesdm (2008-02-11 12:09:32)

wawa · 2008-02-11 12:11:45

plugin :
required : a working synchronization between ocs and glpi (it seems your case)
install it and configure it from the Setup -> plugins menu
then in command line (I assume that you're under unix or linux) launch the .sh file without parameters (launch it as the apache's user, unless you'll have a lot of error message)

then it should synchronize your machines, and in plugins menu you should get the detail of the process

yvesdm · 2008-02-11 13:12:56

wawa wrote:

plugin :
required : a working synchronization between ocs and glpi (it seems your case)
install it and configure it from the Setup -> plugins menu

That's the problem, I can not configure anything there!
I can just click the ocs mass import plugin, but I get no configuration parameters.
I can e-mail you a screenshot if you pm me your address.

wawa wrote:

then in command line (I assume that you're under unix or linux) launch the .sh file without parameters (launch it as the apache's user, unless you'll have a lot of error message)

then it should synchronize your machines, and in plugins menu you should get the detail of the process

S1HBA0001INV:/var/www/glpi/plugins/mass_ocs_import/scripts# ./ocsng_fullsync.sh
S1HBA0001INV:/var/www/glpi/plugins/mass_ocs_import/scripts#

No error messages, but also nothing happens.
I kind of expected this without any configuration :-)

Tnx4 your help!
Kind regards

Last edited by yvesdm (2008-02-11 13:17:04)

remi · 2008-02-11 13:26:35

You must configure :

1/ Configuration / General / restriction / Mode OCSNG

2/ Configuration / mode OCSNG

++

wawa · 2008-02-11 13:26:41

and in the plugin directory ? the process detail tells you that nothing was imported or synchronized ?

yvesdm · 2008-02-11 14:33:26

remi wrote:

You must configure :
1/ Configuration / General / restriction / Mode OCSNG
2/ Configuration / mode OCSNG
++

This is al configured.
Import from ocsng works fine.
Just the plugin doesn't.
When I go to setup->plugins i see, "ocs massive import #1" below "select a plugin to configure"
When I click "ocs massive import #1", Nothing happens. I can NOT enter any configuration parameters. I don't even get fields or whatever to add or select something.

wawa · 2008-02-11 14:37:02

yvesdm wrote:

When I click "ocs massive import #1", Nothing happens. I can NOT enter any configuration parameters. I don't even get fields or whatever to add or select something.

you got a blank page ?

yvesdm · 2008-02-11 16:05:45

wawa wrote:

yvesdm wrote:
When I click "ocs massive import #1", Nothing happens. I can NOT enter any configuration parameters. I don't even get fields or whatever to add or select something.
you got a blank page ?

Ok, I took screenshots.

http://81.82.202.177/downloads/

screen1 shows the settings--> plugins before clicking on the plugin
screen2 show the screen after clicking the plugin from screen1

Hope this clears things up a bit :-)
Kind regards
Yves

wawa · 2008-02-11 16:22:28

do you have any message in debug mode ?

yvesdm · 2008-02-11 16:29:31

wawa wrote:

do you have any message in debug mode ?

PHP ERROR: Undefined offset: 8 in /var/www/glpi/plugins/mass_ocs_import/front/plugin_mass_ocs_import.config.form.php at line 63

PHP ERROR: Undefined offset: 3 in /var/www/glpi/plugins/mass_ocs_import/front/plugin_mass_ocs_import.config.form.php at line 78

PS Already posted this here too, but no solution yet.
http://glpi-project.org/forum/viewtopic.php?id=9212

Last edited by yvesdm (2008-02-11 16:31:40)

remi · 2008-02-11 19:47:28

Please try the SVN version (will be 1.1)

=> http://www.glpi-project.org/tarballs-pl … ort.tar.gz

++

yvesdm · 2008-02-11 19:55:07

remi wrote:

Please try the SVN version (will be 1.1)
=> http://www.glpi-project.org/tarballs-pl … ort.tar.gz
++

Ok, I will do tomorrow, I'm home now ;-)
I'll keep you informed.
Tnx for the svn!

kind regards
Yves

yvesdm · 2008-02-12 09:10:34

Hi,

Sorry, but when I install the svn version I get a blank page as soon as I try to acces glpi.
I chowned the plugin to the apache user and also tried to chmod 777. No difference.
Renaming the old version back and removing the new one from the plugins directory sets everything like before.

Kind regards
Yves

remi · 2008-02-12 09:38:39

Thanks for the test.

Can you try the lastest SVN (tomorrow tarball) or your version 1.1 remplacing front/plugin_mass_ocs_import.config.form.php with the one pointed by the link.

Remi.

Last edited by remi (2008-02-12 09:39:53)

yvesdm · 2008-02-12 10:36:24

remi wrote:

Thanks for the test.
Can you try the lastest SVN (tomorrow tarball) or your version 1.1 remplacing front/plugin_mass_ocs_import.config.form.php with the one pointed by the link.
Remi.

Tnx, I tried it but got the same problem.
I'll try again tomorrow with the new tarball.
Right now I'm to busy struggling with this http://glpi-project.org/forum/viewtopic.php?id=9452
This really starts giving me sleepless nights! :-)

remi · 2008-02-13 18:04:57

Some news about mass_ocs_import with latest tarball ?

yvesdm · 2008-02-25 09:38:16

remi wrote:

Some news about mass_ocs_import with latest tarball ?

Hi remi,

I just tried to install the 1.1 version.
Something must be wrong.
I untarred the plugin in the plugins directory.
Then I chmod -R the directory to 777 to be sure we don't have permission problems.
Then I log out from glpi, and I get no login page anymore.(I only get a blank screen)
When i delete the new version of the plugin from the plugins/ directory, and rename the old one again to its default name, everything is fine again.
Any ideas?

Kind regards
Yves

Last edited by yvesdm (2008-02-25 09:42:42)

remi · 2008-02-25 10:37:59

I think you shouldn't rename the directory but move it to another location, because both directory will be considered as plugins.

chrmod 777 is really a bad idea.

++

yvesdm · 2008-02-25 11:01:08

remi wrote:

I think you shouldn't rename the directory but move it to another location, because both directory will be considered as plugins.
chrmod 777 is really a bad idea.
++

I just followed the update procedure :-)
http://glpi-project.org/wiki/doku.php?id=en:plugins

But ok, i 'll try this in 5 min.
Yes I know about 777, but I wanted to be sure it was no rights issue.
Of course I will not leave it like that ;-)

EDIT: It looks like it's working. I can configure it now :-)
If I experience any further problems, I'll post back here. Tnx!

Yves

Last edited by yvesdm (2008-02-25 11:18:13)

yvesdm · 2008-02-25 11:31:34

PS A little question, What does the "number of machines" do under script behaviour?
This is set to 0, is this ok?

Kind regards
Yves

remi · 2008-02-25 11:32:00

Thanks for the feedback.

I've just update the wiki about plugin update.

++

Forum GLPI-Project

Announcement

#1 2008-02-11 10:46:55

ocs auto synchronizing, still not working

#2 2008-02-11 10:52:52

Re: ocs auto synchronizing, still not working

#3 2008-02-11 11:04:41

Re: ocs auto synchronizing, still not working

#4 2008-02-11 11:08:21

Re: ocs auto synchronizing, still not working

#5 2008-02-11 12:07:00

Re: ocs auto synchronizing, still not working

#6 2008-02-11 12:11:45

Re: ocs auto synchronizing, still not working

#7 2008-02-11 13:12:56

Re: ocs auto synchronizing, still not working

#8 2008-02-11 13:26:35

Re: ocs auto synchronizing, still not working

#9 2008-02-11 13:26:41

Re: ocs auto synchronizing, still not working

#10 2008-02-11 14:33:26

Re: ocs auto synchronizing, still not working

#11 2008-02-11 14:37:02

Re: ocs auto synchronizing, still not working

#12 2008-02-11 16:05:45

Re: ocs auto synchronizing, still not working

#13 2008-02-11 16:22:28

Re: ocs auto synchronizing, still not working

#14 2008-02-11 16:29:31

Re: ocs auto synchronizing, still not working

#15 2008-02-11 19:47:28

Re: ocs auto synchronizing, still not working

#16 2008-02-11 19:55:07

Re: ocs auto synchronizing, still not working

#17 2008-02-12 09:10:34

Re: ocs auto synchronizing, still not working

#18 2008-02-12 09:38:39

Re: ocs auto synchronizing, still not working

#19 2008-02-12 10:36:24

Re: ocs auto synchronizing, still not working

#20 2008-02-13 18:04:57

Re: ocs auto synchronizing, still not working

#21 2008-02-25 09:38:16

Re: ocs auto synchronizing, still not working

#22 2008-02-25 10:37:59

Re: ocs auto synchronizing, still not working

#23 2008-02-25 11:01:08

Re: ocs auto synchronizing, still not working

#24 2008-02-25 11:31:34

Re: ocs auto synchronizing, still not working

#25 2008-02-25 11:32:00

Re: ocs auto synchronizing, still not working

Board footer