You are not logged in.

Announcement

 Téléchargez la dernière version stable de GLPI      -     Et vous, que pouvez vous faire pour le projet GLPI ? :  Contribuer
 Download last stable version of GLPI                      -     What can you do for GLPI ? :  Contribute

#1 2012-02-28 11:33:23

MarcusO
Member
Registered: 2012-02-28
Posts: 11

GLPI+FusionInventory: Matching SNMP models

Hallo from Germany,

I know that my questions mainly refer to FusionInventory Plugin, perhaps anybody can still help. I am open to alternatives for scanning the network, but with OCS Inventory for example it was not possible to import the software list to GLPI.

I am using GLPI 0.80.7 with FusionInventory Plugin 0.80 1.1.
After scanning the network I got 620 SNMP models... There are only recognized the chipsets. How can I match these informations to the devices?

Could you explain how to enable the notice of
- filling level of the cartridge
- pagecounter
- IP/MAC adress?

Thanks!

Last edited by MarcusO (2012-05-03 17:27:43)

Offline

#2 2012-02-28 11:38:25

ddurieux
Plugins Dev
From: Propières, France
Registered: 2005-06-17
Posts: 7,521

Re: GLPI+FusionInventory: Matching SNMP models

After have made network inventory (get few informations), you may do network inventory (SNMP inventory) to inventory devices by SNMP and get all informations


Support / dev / installation / configuration GLPI : dcs.glpi@dcsit-group.com
DCS : expert GLPI & FusionInventory / Développeur du plugin FusionInventory
IRC #glpi sur freenode.net

Offline

#3 2012-02-28 11:50:50

MarcusO
Member
Registered: 2012-02-28
Posts: 11

Re: GLPI+FusionInventory: Matching SNMP models

Thanky for your reply, but I don't quite follow. How can I do SNMP inventory? The tasks are are done automatically, aren't they?
Network scanning works good for computers, monitors and software.

Offline

#4 2012-02-28 11:53:30

ddurieux
Plugins Dev
From: Propières, France
Registered: 2005-06-17
Posts: 7,521

Re: GLPI+FusionInventory: Matching SNMP models

Network scanning don't get monitors and software of computers, local inventory (with agent installed on each computer) do this


Support / dev / installation / configuration GLPI : dcs.glpi@dcsit-group.com
DCS : expert GLPI & FusionInventory / Développeur du plugin FusionInventory
IRC #glpi sur freenode.net

Offline

#5 2012-02-28 12:22:51

MarcusO
Member
Registered: 2012-02-28
Posts: 11

Re: GLPI+FusionInventory: Matching SNMP models

You are right, it was a missunderstanding from my side. :-)
I defined an IP adress range. What are the next steps?

Offline

#6 2012-03-01 15:02:54

MarcusO
Member
Registered: 2012-02-28
Posts: 11

Re: GLPI+FusionInventory: Matching SNMP models

Can you give me a hint to do the network inventory? Unfortunately the documentation doesn't deal with this subject.
I have defined two tasks (network scan / SNMP inventory), but there are no results. :-/

Offline

#7 2012-03-05 13:55:13

MarcusO
Member
Registered: 2012-02-28
Posts: 11

Re: GLPI+FusionInventory: Matching SNMP models

Network inventory and SNMP inventory are working now. How do I find the right SNMP model?

Offline

#8 2012-03-05 14:02:39

ddurieux
Plugins Dev
From: Propières, France
Registered: 2005-06-17
Posts: 7,521

Re: GLPI+FusionInventory: Matching SNMP models

It may find them, if not, your devices is not supported, see this procedure : http://forge.fusioninventory.org/projec … g_snmpwalk


Support / dev / installation / configuration GLPI : dcs.glpi@dcsit-group.com
DCS : expert GLPI & FusionInventory / Développeur du plugin FusionInventory
IRC #glpi sur freenode.net

Offline

#9 2012-03-05 14:44:21

MarcusO
Member
Registered: 2012-02-28
Posts: 11

Re: GLPI+FusionInventory: Matching SNMP models

Is there a possibility to report on Windows?

Offline

#10 2012-03-05 14:54:18

ddurieux
Plugins Dev
From: Propières, France
Registered: 2005-06-17
Posts: 7,521

Re: GLPI+FusionInventory: Matching SNMP models

Yes install net-snmp for win32


Support / dev / installation / configuration GLPI : dcs.glpi@dcsit-group.com
DCS : expert GLPI & FusionInventory / Développeur du plugin FusionInventory
IRC #glpi sur freenode.net

Offline

#11 2012-03-08 18:05:32

MarcusO
Member
Registered: 2012-02-28
Posts: 11

Re: GLPI+FusionInventory: Matching SNMP models

Ok, I will report next week.
What can I do if devices are not recognized at all? For example FusionInventory doesn't detect our IP phones and switches (OCS does).

Last edited by MarcusO (2012-03-08 18:05:46)

Offline

#12 2012-03-08 20:26:56

ddurieux
Plugins Dev
From: Propières, France
Registered: 2005-06-17
Posts: 7,521

Re: GLPI+FusionInventory: Matching SNMP models

Make snmpwalk and send me, after I create SNMP models and so is supported wink


Support / dev / installation / configuration GLPI : dcs.glpi@dcsit-group.com
DCS : expert GLPI & FusionInventory / Développeur du plugin FusionInventory
IRC #glpi sur freenode.net

Offline

#13 2012-03-12 12:37:59

MarcusO
Member
Registered: 2012-02-28
Posts: 11

Re: GLPI+FusionInventory: Matching SNMP models

Reports are done and will be sent when the mailserver is working again.

I didn't express myself well, there are several devices not detected (not even as unknown devices). :-/

Offline

#14 2012-05-03 17:24:09

MarcusO
Member
Registered: 2012-02-28
Posts: 11

Re: GLPI+FusionInventory: Matching SNMP models

Hallo David,

there are still several devices not detected at all (for example: all switches). Do you have an advice? Thank you!

Offline

#15 2012-05-08 17:27:29

ddurieux
Plugins Dev
From: Propières, France
Registered: 2005-06-17
Posts: 7,521

Re: GLPI+FusionInventory: Matching SNMP models

Not detected or in unknown devices ?


Support / dev / installation / configuration GLPI : dcs.glpi@dcsit-group.com
DCS : expert GLPI & FusionInventory / Développeur du plugin FusionInventory
IRC #glpi sur freenode.net

Offline

#16 2012-05-08 17:41:02

MarcusO
Member
Registered: 2012-02-28
Posts: 11

Re: GLPI+FusionInventory: Matching SNMP models

Not detected.

Offline

#17 2012-05-08 18:54:10

ddurieux
Plugins Dev
From: Propières, France
Registered: 2005-06-17
Posts: 7,521

Re: GLPI+FusionInventory: Matching SNMP models

Not detected = problem in configuration of your switches.

use agent version 2.1.14 (not 2.2 to test it)


Support / dev / installation / configuration GLPI : dcs.glpi@dcsit-group.com
DCS : expert GLPI & FusionInventory / Développeur du plugin FusionInventory
IRC #glpi sur freenode.net

Offline

Board footer

Powered by FluxBB