You are not logged in.

Announcement

 Téléchargez la dernière version stable de GLPI      -     Et vous, que pouvez vous faire pour le projet GLPI ? :  Contribuer
 Download last stable version of GLPI                      -     What can you do for GLPI ? :  Contribute

#1 2013-12-05 17:41:06

richard_sraing
Member
From: Malmedy
Registered: 2010-06-22
Posts: 94
Website

snmp pour NAS QNAP TS-219P II

Salut tout le monde,

Alors, afin de participer un tout petit peu à la communauté, j'ai dans l’intention d'envoyer tous les snmpwalk possible du matériel de mon réseau.

Là, j'ai voulu envoyer le snmp de mon NAS de marque QNAP modèle TS-219P II.

Lorsque je lance la commande

$ snmpwalk -c [community] -v [version] -t 30 -On [IP] sysdescr
.1.3.6.1.2.1.1.1.0 = STRING: Linux TS-219 4.0.2
$

Voici ce que j'obtiens.

Je tente ensuite d'ajouter / vérifier si un modèle snmp existe dans la base GLPI, et me rends donc sur la page :

Plugins > Fusion Inventory > Réseau > Création de modèles SNMP > Check a sysdescr

Arrivé là, je sélectionne matériel réseau dans le menu déroulant, et introduit le code retourné par ma commande snmpwalk, à savoir "Linux TS-219 4.0.2" sans les guillemets évidemment.

Et la surprise, j'ai un petit message me signalant :

Command to get the sysdescr

This device need use another OID for 'sysdescr' (try in order and stop when OID exist and not empty):
snmpwalk -v [version] -c [community] -t 30 -On [IP] .1.3.6.1.2.1.1.5.0 ( If this OID exist )
snmpwalk -v [version] -c [community] -t 30 -On [IP] .1.3.6.1.4.1.714.1.2.5.6.1.2.1.6.1 ( If this OID exist )

Je ne comprends rien du tout à cela.

Lorsque je tente la première commande, il me retourne le nom donné à mon NAS, et la deuxième commande ne me retourne rien.

Quelqu'un peut-il m'expliquer ce qui se passe ?

Si cela peut vous intéresser, j'ai une option sur le dit NAS, permettant de récupérer un fichier intitulé "NAS.mib", dont le contenu est le suivant :

NAS-MIB DEFINITIONS ::= BEGIN

   IMPORTS
      enterprises, Counter, TimeTicks
         FROM RFC1155-SMI
      Integer32, Counter32, IpAddress, Unsigned32, Counter64
         FROM SNMPv2-SMI
      OBJECT-TYPE
         FROM RFC-1212
      TRAP-TYPE
         FROM RFC-1215;

      -- From RFC-1213 (MIB-II)
      DisplayString ::=
         OCTET STRING

    storage     OBJECT IDENTIFIER ::= { enterprises 24681 }
    storageSystem        OBJECT IDENTIFIER ::= { storage 1 }

 -- Frame Relay Multiplexer MIB groups
 -- system Event
   SystemEventMsg        OBJECT IDENTIFIER ::= { storageSystem 1 }

 -- system event
   EventInformMsg OBJECT-TYPE
      SYNTAX  DisplayString
      ACCESS  read-only
      STATUS  current
      DESCRIPTION
         "Information event of NAS system."
     ::= { SystemEventMsg 101 }

   EventWarningMsg OBJECT-TYPE
      SYNTAX  DisplayString
      ACCESS  read-only
      STATUS  current
      DESCRIPTION
         "Warning event of NAS system."
      ::= { SystemEventMsg 102 }

   EventErrorMsg OBJECT-TYPE
      SYNTAX  DisplayString
      ACCESS  read-only
      STATUS  current
      DESCRIPTION
         "Error event of NAS system."
      ::= { SystemEventMsg 103 }

    SystemTraps OBJECT IDENTIFIER ::= { storageSystem  10 }
    
    EventInform TRAP-TYPE
        ENTERPRISE SystemTraps    
        VARIABLES { EventInformMsg }
        DESCRIPTION
            "Info: %s"
        ::=  1

    EventWarning TRAP-TYPE
        ENTERPRISE SystemTraps    
        VARIABLES { EventWarningMsg }
        DESCRIPTION 
            "Warn: %s"
        ::=  2

    EventError TRAP-TYPE
        ENTERPRISE SystemTraps
        VARIABLES { EventErrorMsg }
        DESCRIPTION 
            "Error: %s"
        ::=  4

 -- system inform
    SystemInfo        OBJECT IDENTIFIER ::= { storageSystem 2 }

    SystemCPU-Usage OBJECT-TYPE
        SYNTAX DisplayString
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
            "System CPU usage"
        ::= { SystemInfo 1 }
    SystemTotalMem OBJECT-TYPE
        SYNTAX DisplayString
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
            "System total memory"
        ::= { SystemInfo 2 }
    SystemFreeMem OBJECT-TYPE
        SYNTAX DisplayString
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
            "System free memory"
        ::= { SystemInfo 3 }
    SystemUptime OBJECT-TYPE
        SYNTAX     TimeTicks
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
            "The amount of time since this host was last
            initialized.  Note that this is different from
            sysUpTime in the SNMPv2-MIB [RFC1907] because
            sysUpTime is the uptime of the network management
            portion of the system."
        ::= { SystemInfo 4 }
    CPU-Temperature OBJECT-TYPE
        SYNTAX DisplayString
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
            "CPU temperature"
        ::= { SystemInfo 5 }
    SystemTemperature OBJECT-TYPE
        SYNTAX DisplayString
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
            "System temperature"
        ::= { SystemInfo 6 }

IfNumber OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of network interfaces (regardless of
            their current state) present on this system."
    ::= { SystemInfo 8 }
SystemIfTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF IfEntryDef
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
            "A list of interface entries.  The number of
            entries is given by the value of IfNumber."
    ::= { SystemInfo 9 }
IfEntry OBJECT-TYPE
    SYNTAX  IfEntryDef
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
            "An interface entry containing objects at the
            subnetwork layer and below for a particular
            interface."
    INDEX   { IfIndex }
    ::= { SystemIfTable 1 }
IfEntryDef ::=
    SEQUENCE {
        IfIndex
            INTEGER,
        IfDescr
            DisplayString,
        IfPacketsReceived
            Counter,
        IfPacketsSent
            Counter,
        IfErrorPackets
            Counter
    }
IfIndex OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "A unique value for each interface.  Its value
            ranges between 1 and the value of IfNumber.  The
            value for each interface must remain constant at
            least from one re-initialization of the entity's
            network management system to the next re-
            initialization."
    ::= { IfEntry 1 }
IfDescr OBJECT-TYPE
    SYNTAX  DisplayString (SIZE (0..255))
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "A textual string containing information about the
            interface.  This string should include the name of
            the manufacturer, the product name and the version
            of the hardware interface."
    ::= { IfEntry 2 }
IfPacketsReceived OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "System packets received."
    ::= { IfEntry 3 }
IfPacketsSent OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "System packets sent."
    ::= { IfEntry 4 }
IfErrorPackets OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "System error packets."
    ::= { IfEntry 5 }

HdNumber OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of hard disk (regardless of
            their current state) present on this system."
    ::= { SystemInfo 10 }
SystemHdTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF HdEntryDef
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
            "A list of interface entries.  The number of
            entries is given by the value of IfNumber."
    ::= { SystemInfo 11 }
HdEntry OBJECT-TYPE
    SYNTAX  HdEntryDef
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
            "An interface entry containing objects at the
            subnetwork layer and below for a particular
            interface."
    INDEX   { HdIndex }
    ::= { SystemHdTable 1 }
HdEntryDef ::=
    SEQUENCE {
        HdIndex
            INTEGER,
        HdDescr
            DisplayString,
        HdTemperature
            DisplayString,
        HdStatus
            INTEGER,
    HdModel DisplayString,
    HdCapacity DisplayString,
    HdSmartInfo DisplayString
    }
HdIndex OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "A unique value for each hard disk.  Its value
            ranges between 1 and the value of IfNumber.  The
            value for each interface must remain constant at
            least from one re-initialization of the entity's
            network management system to the next re-
            initialization."
    ::= { HdEntry 1 }
HdDescr OBJECT-TYPE
    SYNTAX  DisplayString (SIZE (0..255))
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "A textual string containing information about the
            interface.  This string should include the name of
            the manufacturer, the product name and the version
            of the hardware interface."
    ::= { HdEntry 2 }
HdTemperature OBJECT-TYPE
    SYNTAX  DisplayString
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "Hard disk temperature."
    ::= { HdEntry 3 }
HdStatus OBJECT-TYPE
    SYNTAX     INTEGER {
    ready(0),
    noDisk(-5),
    invalid(-6),
    rwError(-9),
    unknown(-4)
    }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "HDD status. 0:not availible, 1:availible."
    ::= { HdEntry 4 }
HdModel OBJECT-TYPE
    SYNTAX  DisplayString
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION "Hard disk model."
    ::= { HdEntry 5 }
HdCapacity OBJECT-TYPE
    SYNTAX  DisplayString
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION "Hard disk capacity."
    ::= { HdEntry 6 }
HdSmartInfo OBJECT-TYPE
    SYNTAX  DisplayString
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION "Hard disk SMART information."
    ::= { HdEntry 7 }

    ModelName OBJECT-TYPE
        SYNTAX DisplayString
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
            "Model name"
        ::= { SystemInfo 12 }
    HostName OBJECT-TYPE
        SYNTAX DisplayString
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
            "Model name"
        ::= { SystemInfo 13 }

SysFanNumber OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of system fan (regardless of
            their current state) present on this system."
    ::= { SystemInfo 14 }
SystemFanTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF SysFanEntryDef
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
            "A list of interface entries.  The number of
            entries is given by the value of SysFanNumber."
    ::= { SystemInfo 15 }
SysFanEntry OBJECT-TYPE
    SYNTAX  SysFanEntryDef
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
            "An system fan entry containing objects at the
            subnetwork layer and below for a particular
            interface."
    INDEX   { SysFanIndex }
    ::= { SystemFanTable 1 }
SysFanEntryDef ::=
    SEQUENCE {
        SysFanIndex
            INTEGER,
        SysFanDescr
            DisplayString,
        SysFanSpeed
            DisplayString
    }
SysFanIndex OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "A unique value for each system fan. Its value
            ranges between 1 and the value of SysFanNumber.  The
            value for each interface must remain constant at
            least from one re-initialization of the entity's
            network management system to the next re-
            initialization."
    ::= { SysFanEntry 1 }
SysFanDescr OBJECT-TYPE
    SYNTAX  DisplayString (SIZE (0..255))
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "A textual string containing information about the
            interface.  This string should include the name of
            the manufacturer, the product name and the version
            of the hardware interface."
    ::= { SysFanEntry 2 }
SysFanSpeed OBJECT-TYPE
    SYNTAX  DisplayString (SIZE (0..255))
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "System fan speed."
    ::= { SysFanEntry 3 }

SysVolumeNumber OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of system volumes (regardless of
            their current state) present on this system."
    ::= { SystemInfo 16 }
SystemVolumeTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF SysVolumeEntryDef
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
            "A list of volume entries.  The number of
            entries is given by the value of SysVolumeNumber."
    ::= { SystemInfo 17 }
SysVolumeEntry OBJECT-TYPE
    SYNTAX  SysVolumeEntryDef
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
            "An system volume entry"
    INDEX   { SysVolumeIndex }
    ::= { SystemVolumeTable 1 }
SysVolumeEntryDef ::=
    SEQUENCE {
        SysVolumeIndex    INTEGER,
        SysVolumeDescr    DisplayString,
    SysVolumeFS    DisplayString,
    SysVolumeTotalSize    DisplayString,
    SysVolumeFreeSize    DisplayString,
    SysVolumeStatus    DisplayString
    }
SysVolumeIndex OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "A unique value for each system volume. Its value
            ranges between 1 and the value of SysVolumeNumber.  The
            value for each volume must remain constant at
            least from one re-initialization of the entity's
            volume system to the next re-initialization."
    ::= { SysVolumeEntry 1 }
SysVolumeDescr OBJECT-TYPE
    SYNTAX  DisplayString (SIZE (0..255))
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION    "A textual string containing information about the volume."
    ::= { SysVolumeEntry 2 }
SysVolumeFS OBJECT-TYPE
    SYNTAX  DisplayString (SIZE (0..15))
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION    "System Volume file system."
    ::= { SysVolumeEntry 3 }
SysVolumeTotalSize OBJECT-TYPE
    SYNTAX  DisplayString (SIZE (0..15))
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION    "System Volume total size."
    ::= { SysVolumeEntry 4 }
SysVolumeFreeSize OBJECT-TYPE
    SYNTAX  DisplayString (SIZE (0..15))
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION    "System Volume free size."
    ::= { SysVolumeEntry 5 }
SysVolumeStatus OBJECT-TYPE
    SYNTAX  DisplayString (SIZE (0..255))
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION    "System Volume status."
    ::= { SysVolumeEntry 6 }
 -- system inform Ex
    SystemInfoEx        OBJECT IDENTIFIER ::= { storageSystem 3 }

    SystemCPU-UsageEX OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
            "System CPU usage"
        ::= { SystemInfoEx 1 }
    SystemTotalMemEX OBJECT-TYPE
        SYNTAX Counter64
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
            "System total memory in byte"
        ::= { SystemInfoEx 2 }
    SystemFreeMemEX OBJECT-TYPE
        SYNTAX Counter64
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
            "System free memory in byte"
        ::= { SystemInfoEx 3 }
    SystemUptimeEX OBJECT-TYPE
        SYNTAX     TimeTicks
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
            "The amount of time since this host was last
            initialized.  Note that this is different from
            sysUpTime in the SNMPv2-MIB [RFC1907] because
            sysUpTime is the uptime of the network management
            portion of the system."
        ::= { SystemInfoEx 4 }
    CPU-TemperatureEX OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
            "CPU temperature in centigrade"
        ::= { SystemInfoEx 5 }
    SystemTemperatureEX OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
            "System temperature in centigrade"
        ::= { SystemInfoEx 6 }

IfNumberEX OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of network interfaces (regardless of
            their current state) present on this system."
    ::= { SystemInfoEx 8 }
SystemIfTableEX OBJECT-TYPE
    SYNTAX  SEQUENCE OF IfEntryDef
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
            "A list of interface entries.  The number of
            entries is given by the value of IfNumber."
    ::= { SystemInfoEx 9 }
IfEntryEX OBJECT-TYPE
    SYNTAX  IfEntryDef
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
            "An interface entry containing objects at the
            subnetwork layer and below for a particular
            interface."
    INDEX   { IfIndex }
    ::= { SystemIfTable 1 }
IfEntryDef ::=
    SEQUENCE {
        IfIndex
            INTEGER,
        IfDescr
            DisplayString,
        IfPacketsReceived
            Counter,
        IfPacketsSent
            Counter,
        IfErrorPackets
            Counter
    }
IfIndexEX OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "A unique value for each interface.  Its value
            ranges between 1 and the value of IfNumber.  The
            value for each interface must remain constant at
            least from one re-initialization of the entity's
            network management system to the next re-
            initialization."
    ::= { IfEntry 1 }
IfDescrEX OBJECT-TYPE
    SYNTAX  DisplayString (SIZE (0..255))
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "A textual string containing information about the
            interface.  This string should include the name of
            the manufacturer, the product name and the version
            of the hardware interface."
    ::= { IfEntry 2 }
IfPacketsReceivedEX OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "System packets received."
    ::= { IfEntry 3 }
IfPacketsSentEX OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "System packets sent."
    ::= { IfEntry 4 }
IfErrorPacketsEX OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "System error packets."
    ::= { IfEntry 5 }

HdNumberEX OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of hard disk (regardless of
            their current state) present on this system."
    ::= { SystemInfoEx 10 }
SystemHdTableEX OBJECT-TYPE
    SYNTAX  SEQUENCE OF HdEntryDef
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
            "A list of interface entries.  The number of
            entries is given by the value of IfNumber."
    ::= { SystemInfoEx 11 }
HdEntryEX OBJECT-TYPE
    SYNTAX  HdEntryDef
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
            "An interface entry containing objects at the
            subnetwork layer and below for a particular
            interface."
    INDEX   { HdIndex }
    ::= { SystemHdTable 1 }
HdEntryDef ::=
    SEQUENCE {
        HdIndex
            INTEGER,
        HdDescr
            DisplayString,
        HdTemperature
            Integer32,
        HdStatus
            INTEGER,
    HdModel DisplayString,
    HdCapacity Counter64,
    HdSmartInfo DisplayString
    }
HdIndexEX OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "A unique value for each hard disk.  Its value
            ranges between 1 and the value of IfNumber.  The
            value for each interface must remain constant at
            least from one re-initialization of the entity's
            network management system to the next re-
            initialization."
    ::= { HdEntry 1 }
HdDescrEX OBJECT-TYPE
    SYNTAX  DisplayString (SIZE (0..255))
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "A textual string containing information about the
            interface.  This string should include the name of
            the manufacturer, the product name and the version
            of the hardware interface."
    ::= { HdEntry 2 }
HdTemperatureEX OBJECT-TYPE
    SYNTAX  Integer32
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "Hard disk temperature in centigrade."
    ::= { HdEntry 3 }
HdStatusEX OBJECT-TYPE
    SYNTAX     INTEGER {
    ready(0),
    noDisk(-5),
    invalid(-6),
    rwError(-9),
    unknown(-4)
    }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "HDD status. 0:not availible, 1:availible."
    ::= { HdEntry 4 }
HdModelEX OBJECT-TYPE
    SYNTAX  DisplayString
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION "Hard disk model."
    ::= { HdEntry 5 }
HdCapacityEX OBJECT-TYPE
    SYNTAX  Counter64
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION "Hard disk capacity in byte."
    ::= { HdEntry 6 }
HdSmartInfoEX OBJECT-TYPE
    SYNTAX  DisplayString
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION "Hard disk SMART information."
    ::= { HdEntry 7 }

    ModelNameEX OBJECT-TYPE
        SYNTAX DisplayString
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
            "Model name"
        ::= { SystemInfoEx 12 }
    HostNameEX OBJECT-TYPE
        SYNTAX DisplayString
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
            "Model name"
        ::= { SystemInfoEx 13 }

SysFanNumberEX OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of system fan (regardless of
            their current state) present on this system."
    ::= { SystemInfoEx 14 }
SystemFanTableEX OBJECT-TYPE
    SYNTAX  SEQUENCE OF SysFanEntryDef
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
            "A list of interface entries.  The number of
            entries is given by the value of SysFanNumber."
    ::= { SystemInfoEx 15 }
SysFanEntryEX OBJECT-TYPE
    SYNTAX  SysFanEntryDef
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
            "An system fan entry containing objects at the
            subnetwork layer and below for a particular
            interface."
    INDEX   { SysFanIndex }
    ::= { SystemFanTable 1 }
SysFanEntryDef ::=
    SEQUENCE {
        SysFanIndex
            INTEGER,
        SysFanDescr
            DisplayString,
        SysFanSpeed
            Integer32
    }
SysFanIndexEX OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "A unique value for each system fan. Its value
            ranges between 1 and the value of SysFanNumber.  The
            value for each interface must remain constant at
            least from one re-initialization of the entity's
            network management system to the next re-
            initialization."
    ::= { SysFanEntry 1 }
SysFanDescrEX OBJECT-TYPE
    SYNTAX  DisplayString (SIZE (0..255))
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "A textual string containing information about the
            interface.  This string should include the name of
            the manufacturer, the product name and the version
            of the hardware interface."
    ::= { SysFanEntry 2 }
SysFanSpeedEX OBJECT-TYPE
    SYNTAX  Integer32
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "System fan speed (RPM)."
    ::= { SysFanEntry 3 }

SysVolumeNumberEX OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of system volumes (regardless of
            their current state) present on this system."
    ::= { SystemInfoEx 16 }
SystemVolumeTableEX OBJECT-TYPE
    SYNTAX  SEQUENCE OF SysVolumeEntryDef
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
            "A list of volume entries.  The number of
            entries is given by the value of SysVolumeNumber."
    ::= { SystemInfoEx 17 }
SysVolumeEntryEX OBJECT-TYPE
    SYNTAX  SysVolumeEntryDef
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
            "An system volume entry"
    INDEX   { SysVolumeIndex }
    ::= { SystemVolumeTable 1 }
SysVolumeEntryDef ::=
    SEQUENCE {
        SysVolumeIndex    INTEGER,
        SysVolumeDescr    DisplayString,
    SysVolumeFS    DisplayString,
    SysVolumeTotalSize    Counter64,
    SysVolumeFreeSize    Counter64,
    SysVolumeStatus    DisplayString
    }
SysVolumeIndexEX OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "A unique value for each system volume. Its value
            ranges between 1 and the value of SysVolumeNumber.  The
            value for each volume must remain constant at
            least from one re-initialization of the entity's
            volume system to the next re-initialization."
    ::= { SysVolumeEntry 1 }
SysVolumeDescrEX OBJECT-TYPE
    SYNTAX  DisplayString (SIZE (0..255))
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION    "A textual string containing information about the volume."
    ::= { SysVolumeEntry 2 }
SysVolumeFSEX OBJECT-TYPE
    SYNTAX  DisplayString (SIZE (0..15))
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION    "System Volume file system."
    ::= { SysVolumeEntry 3 }
SysVolumeTotalSizeEX OBJECT-TYPE
    SYNTAX  Counter64
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION    "System Volume total size in byte."
    ::= { SysVolumeEntry 4 }
SysVolumeFreeSizeEX OBJECT-TYPE
    SYNTAX  Counter64
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION    "System Volume free size in byte."
    ::= { SysVolumeEntry 5 }
SysVolumeStatusEX OBJECT-TYPE
    SYNTAX  DisplayString (SIZE (0..255))
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION    "System Volume status."
    ::= { SysVolumeEntry 6 }
END

Ces informations peuvent-elles vous être d'une quelconque utilités ?

En vous remerciant pour le travail que vous faites, je vous souhaite à tous de passer une bonne fin de journée et une bonne soirée.

Offline

Board footer

Powered by FluxBB