You are not logged in.

Announcement

 Téléchargez la dernière version stable de GLPI      -     Et vous, que pouvez vous faire pour le projet GLPI ? :  Contribuer
 Download last stable version of GLPI                      -     What can you do for GLPI ? :  Contribute

#1 2017-05-11 15:30:15

adminlewis
Guest
Registered: 2010-06-22
Posts: 44
Website

ocs and fusioninventory

Hi,
can I use both ocsinventory and fusioninventory ?
can they give me any problems ?


Linux server e Microsoft Windows 2003/2008 server.
http://predellino.blogspot.com

Offline

#2 2017-05-11 16:16:38

narutobaka
Guest
Registered: 2007-09-07
Posts: 283

Re: ocs and fusioninventory

hi

Yes you can have both client on same computer without problem.

I did it when I test fusioninventory in replacement of OCS.

And I use OCS client to deploy fusioninventory wink.

cordialy,


Prod : centos-release-7-2  | GLPI  0.90.3 | fusioninventory-for-glpi_0.90.1.3.tar.gz | fusioninventory-agent_windows-{x86|x64}_2.3.17
Rectorat de Caen

Offline

#3 2017-05-11 16:48:21

adminlewis
Guest
Registered: 2010-06-22
Posts: 44
Website

Re: ocs and fusioninventory

Thank you very much Narutobaka,
can I ask u the command line to install fusioninventory agent in silent mode ?
I see there are many options to install... and some looks "strange".

/S /acceptlicense /add-firewall-exception /installtasks=Collect,Deploy,Inventory,NetDiscovery,NetInventory,WakeOnLan  /runnow /execmode=Service /installtype=from-scratch /httpd-trust='127.0.0.1/32,192.168.2.119/32,and.my.pc.ip/32'  /no-category= /scan-homedirs /server='http://192.168.2.119/plugins/fusioninventory/' /tasks=inventory,deploy,inventory,... 

for example could be useful the args /scan-homedirs ?
I think no because I am not interested if any users have virtualmachine..
Also I don't understand the difference betwheen /installtasks and /tasks
Thank u for help..


Linux server e Microsoft Windows 2003/2008 server.
http://predellino.blogspot.com

Offline

#4 2017-05-15 09:53:54

narutobaka
Guest
Registered: 2007-09-07
Posts: 283

Re: ocs and fusioninventory

hi

http://forum.fusioninventory.org/viewtopic.php?id=4344

'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
'
'    Consult the installer documentation to know its list of options.
'
'    You should use simple quotes (') to set between quotation marks those values
'    that require it; double quotes (") doesn't work with UNCs.
'
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
'
'/S                                 Run setup in silent mode
'/acceptlicense                You accept and acknowledge that you have read, and understood, the terms and conditions of FusionInventory Agent 2.3.2 license. (By default: No)
'/installtasks=full             Installation complete
'/no-start-menu               Pas de dossier dans le menu démarrer
'/add-firewall-exception    Adds FusionInventory Agent to the Windows Firewall exception list. (By default: No)
'/server='url1,url2'           Set url of server penser à mettre entre cote
'/proxy='http://proxy/'      Set proxy penser à mettre entre cote
'/debug=level                  Sets the debug level of the agent. (By default: 0) level can be any of the following values: 0: Debug off 1: Normal debug 2: Full debug
'/runnow                         Run agent after end of installation
'/execmode=mode           Sets the agent execution mode. (By default: Current) Mode can be any of the following values:
'                                     Service: The agent runs as a Windows Service (always running)
'                                     Task: The agent runs as a Windows Task (runs at intervals)
'                                     Manual: The agent doesn’t run automatically (no Service, no Task)
'                                     Current: The agent runs in the same way that the agent already installed runs
'
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''

SetupOptions = "/S /acceptlicense /installtasks=full /no-start-menu /add-firewall-exception /server='chemin du serveur glpi' /proxy='chemin du proxy' /debug=2 /runnow /execmode=Service"

cordialy


Prod : centos-release-7-2  | GLPI  0.90.3 | fusioninventory-for-glpi_0.90.1.3.tar.gz | fusioninventory-agent_windows-{x86|x64}_2.3.17
Rectorat de Caen

Offline

#5 2017-05-16 09:54:07

adminlewis
Guest
Registered: 2010-06-22
Posts: 44
Website

Re: ocs and fusioninventory

Thank u very much.

Anyway fusioninventory has some cons ... for example does not show me the empty ram slot. OCS does!


Linux server e Microsoft Windows 2003/2008 server.
http://predellino.blogspot.com

Offline

#6 2017-05-17 16:46:28

narutobaka
Guest
Registered: 2007-09-07
Posts: 283

Re: ocs and fusioninventory

hi

Yes there is some différence between OCS and Fusioninventory.

You have to make test to see them.

Some post on GLPI and Fusioninventory forum talk about those difference.

cordialy


Prod : centos-release-7-2  | GLPI  0.90.3 | fusioninventory-for-glpi_0.90.1.3.tar.gz | fusioninventory-agent_windows-{x86|x64}_2.3.17
Rectorat de Caen

Offline

Board footer

Powered by FluxBB